source: trunk/test/testrun_2a.sh@ 43

Last change on this file since 43 was 30, checked in by rainer, 19 years ago

Release candidate 3 for version 2.2.0
File size: 8.0 KB
Line 
1#! /bin/sh
2
3#
4# Copyright Rainer Wichmann (2006)
5#
6# License Information:
7# This program is free software; you can redistribute it and/or modify
8# it under the terms of the GNU General Public License as published by
9# the Free Software Foundation; either version 2 of the License, or
10# (at your option) any later version.
11#
12# This program is distributed in the hope that it will be useful,
13# but WITHOUT ANY WARRANTY; without even the implied warranty of
14# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15# GNU General Public License for more details.
16#
17# You should have received a copy of the GNU General Public License
18# along with this program; if not, write to the Free Software
19# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20#
21
22LOGFILE="$PW_DIR/.samhain_log"; export LOGFILE
23RCFILE="$PW_DIR/testrc_2"; export RCFILE
24
25SERVER_BUILDOPTS="--quiet $TRUST --enable-network=server --prefix=$PW_DIR --localstatedir=$PW_DIR --with-config-file=REQ_FROM_SERVER$PW_DIR/testrc_2 --with-data-file=REQ_FROM_SERVER$PW_DIR/.samhain_file --with-logserver=${SH_LOCALHOST} --with-log-file=$PW_DIR/.samhain_log --with-pid-file=$PW_DIR/.samhain_lock"; export SERVER_BUILDOPTS
26
27CLIENT_BUILDOPTS="--quiet $TRUST --enable-debug --enable-network=client --enable-srp --prefix=$PW_DIR --with-tmp-dir=$PW_DIR --localstatedir=$PW_DIR --with-config-file=REQ_FROM_SERVER$RCFILE --with-data-file=REQ_FROM_SERVER$PW_DIR/.samhain_file --with-logserver=localhost --with-log-file=$LOGFILE --with-pid-file=$PW_DIR/.samhain_lock"; export CLIENT_BUILDOPTS
28
29do_test_1_a () {
30
31 [ -z "$verbose" ] || {
32 echo;
33 echo "${S}Start Server${E}: ./yule -l info -p none &";
34 echo;
35 }
36 rm -f test_log_valgrind
37
38 ${VALGRIND} ./yule -l info -p none >/dev/null 2>>test_log_valgrind &
39 PROC_Y=$!
40 sleep 5
41
42 [ -z "$verbose" ] || {
43 echo;
44 echo "${S}Start Client${E}: ./samhain.new -l none -p none -e info -t check";
45 echo;
46 }
47
48 ${VALGRIND} ./samhain.new -t check -p none -l none -e info --bind-address=127.0.0.1 >/dev/null 2>>test_log_valgrind
49 if test x$? = x0; then
50 [ -z "$verbose" ] || log_msg_ok "samhain.new -t check";
51 else
52 [ -z "$quiet" ] && log_msg_fail "samhain.new -t check";
53 kill $PROC_Y
54 return 1
55 fi
56
57 kill $PROC_Y
58 sleep 5
59
60 egrep "START(>|\").*Yule(>|\")" $LOGFILE >/dev/null 2>&1
61 if [ $? -ne 0 ]; then
62 [ -z "$verbose" ] || log_msg_fail "Server start";
63 return 1
64 fi
65 egrep "NEW CLIENT" $LOGFILE >/dev/null 2>&1
66 if [ $? -ne 0 ]; then
67 [ -z "$verbose" ] || log_msg_fail "Client connect";
68 return 1
69 fi
70 egrep "Checking.*/etc" $LOGFILE >/dev/null 2>&1
71 if [ $? -ne 0 ]; then
72 [ -z "$verbose" ] || log_msg_fail "Client file check";
73 return 1
74 fi
75 egrep "EXIT.*Samhain" $LOGFILE >/dev/null 2>&1
76 if [ $? -ne 0 ]; then
77 [ -z "$verbose" ] || log_msg_fail "Client exit";
78 return 1
79 fi
80 egrep "EXIT.*Yule.*SIGTERM" $LOGFILE >/dev/null 2>&1
81 if [ $? -ne 0 ]; then
82 [ -z "$verbose" ] || log_msg_fail "Server exit";
83 return 1
84 fi
85
86 [ -z "$VALGRIND" ] || {
87 tmp=`cat test_log_valgrind 2>/dev/null | wc -l`;
88 if [ $tmp -ne 0 ]; then
89 [ -z "$verbose" ] || log_msg_fail "valgrind reports errors";
90 cat test_log_valgrind
91 return 1;
92 fi;
93 }
94
95 return 0
96}
97
98testrun2a_internal ()
99{
100 [ -z "$verbose" ] || {
101 echo;
102 echo Working directory: $PW_DIR; echo MAKE is $MAKE;
103 echo;
104 }
105 #
106 #
107 [ -z "$verbose" ] || { echo; echo "${S}Building client and server${E}"; echo; }
108 #
109 if test -r "Makefile"; then
110 $MAKE distclean
111 fi
112 #
113 ${TOP_SRCDIR}/configure ${CLIENT_BUILDOPTS}
114 #
115 if test x$? = x0; then
116 [ -z "$verbose" ] || log_msg_ok "configure...";
117 $MAKE > /dev/null 2>>test_log
118 if test x$? = x0; then
119 [ -z "$verbose" ] || log_msg_ok "make...";
120 else
121 [ -z "$quiet" ] && log_msg_fail "make...";
122 return 1
123 fi
124
125 else
126 [ -z "$quiet" ] && log_msg_fail "configure...";
127 return 1
128 fi
129
130 # save binary and build server
131 #
132 cp samhain samhain.build || return 1
133 $MAKE clean >/dev/null || return 1
134
135 ${TOP_SRCDIR}/configure ${SERVER_BUILDOPTS}
136 #
137 if test x$? = x0; then
138 [ -z "$verbose" ] || log_msg_ok "configure...";
139 $MAKE > /dev/null 2>>test_log
140 if test x$? = x0; then
141 [ -z "$verbose" ] || log_msg_ok "make...";
142 else
143 [ -z "$quiet" ] && log_msg_fail "make...";
144 return 1
145 fi
146
147 else
148 [ -z "$quiet" ] && log_msg_fail "configure...";
149 return 1
150 fi
151
152
153 #####################################################################
154 #
155 #
156 rm -f ./.samhain_file
157 rm -f ./.samhain_log
158 rm -f ./.samhain_lock
159 rm -f ./rc.${SH_LOCALHOST}
160 rm -f ./file.${SH_LOCALHOST}
161 rm -f "./rc.${ALTHOST}"
162 rm -f "./file.${ALTHOST}"
163
164 cp ${SCRIPTDIR}/testrc_2.in testrc_2
165
166 ./samhain.build -t init -p none
167
168 if test x$? = x0; then
169 [ -z "$verbose" ] || log_msg_ok "init...";
170 else
171 [ -z "$quiet" ] && log_msg_fail "init...";
172 return 1
173 fi
174
175 # Create a password
176
177 SHPW=`./yule -G`
178 if test x"$SHPW" = x; then
179 [ -z "$quiet" ] && log_msg_fail "password not generated -- aborting"
180 return 1
181 fi
182
183 # Set in client
184
185 ./samhain_setpwd samhain.build new $SHPW >/dev/null
186
187 if test x$? = x0; then
188 [ -z "$verbose" ] || log_msg_ok "./samhain_setpwd samhain.build new $SHPW";
189 else
190 [ -z "$quiet" ] && log_msg_fail "./samhain_setpwd samhain.build new $SHPW";
191 return 1
192 fi
193
194 mv samhain.build.new samhain.new || return 1
195
196 rm -f ./.samhain_log*
197 rm -f ./.samhain_lock
198
199 SHCLT=`./yule -P $SHPW`
200
201 if test x$? = x0; then
202 [ -z "$verbose" ] || log_msg_ok "yule -P $SHPW";
203 else
204 [ -z "$quiet" ] && log_msg_fail "yule -P $SHPW";
205 return 1
206 fi
207
208 SHCLT1=`echo "${SHCLT}" | sed s%HOSTNAME%${SH_LOCALHOST}%`
209 AHOST=`find_hostname`
210 SHCLT2=`echo "${SHCLT}" | sed s%HOSTNAME%${AHOST}%`
211
212
213 echo $SHCLT1 >> testrc_2
214 echo $SHCLT2 >> testrc_2
215
216
217 cp ./testrc_2 ./rc.${SH_LOCALHOST}
218 mv ./.samhain_file ./file.${SH_LOCALHOST}
219
220 ALTHOST=`find_hostname`
221 cp ./testrc_2 "./rc.${ALTHOST}"
222 cp ./file.${SH_LOCALHOST} "./file.${ALTHOST}" 2>/dev/null
223
224}
225
226MAXTEST=5; export MAXTEST
227
228testrun2a ()
229{
230 log_start "RUN FULL CLIENT/SERVER";
231 #
232 if [ x"$1" = x ]; then
233 [ -z "$quiet" ] && log_msg_fail "Missing hostname"
234 fi
235 #
236 SH_LOCALHOST=$1; export SH_LOCALHOST
237 #
238 testrun2a_internal
239 do_test_1_a
240 if [ $? -eq 0 ]; then
241 [ -z "$quiet" ] && log_ok 1 ${MAXTEST} "Client download+logging";
242 else
243 [ -z "$quiet" ] && log_fail 1 ${MAXTEST} "Client download+logging";
244 fi
245 #
246 SERVER_BUILDOPTS_ORIG="${SERVER_BUILDOPTS}"
247 CLIENT_BUILDOPTS_ORIG="${CLIENT_BUILDOPTS}"
248 #
249 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG} --disable-srp"
250 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --disable-srp"
251 #
252 testrun2a_internal
253 do_test_1_a
254 if [ $? -eq 0 ]; then
255 [ -z "$quiet" ] && log_ok 2 ${MAXTEST} "SRP disabled";
256 else
257 [ -z "$quiet" ] && log_fail 2 ${MAXTEST} "SRP disabled";
258 fi
259 #
260 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG} --disable-encrypt"
261 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --disable-encrypt"
262 #
263 testrun2a_internal
264 do_test_1_a
265 if [ $? -eq 0 ]; then
266 [ -z "$quiet" ] && log_ok 3 ${MAXTEST} "Encryption disabled";
267 else
268 [ -z "$quiet" ] && log_fail 3 ${MAXTEST} "Encryption disabled";
269 fi
270 #
271 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG} --enable-encrypt=1"
272 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --enable-encrypt=1"
273 #
274 testrun2a_internal
275 do_test_1_a
276 if [ $? -eq 0 ]; then
277 [ -z "$quiet" ] && log_ok 4 ${MAXTEST} "Encryption (v1)";
278 else
279 [ -z "$quiet" ] && log_fail 4 ${MAXTEST} "Encryption (v1)";
280 fi
281 #
282 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG}"
283 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --enable-encrypt=1"
284 #
285 testrun2a_internal
286 do_test_1_a
287 if [ $? -eq 0 ]; then
288 [ -z "$quiet" ] && log_ok 5 ${MAXTEST} "Encryption backward compat";
289 else
290 [ -z "$quiet" ] && log_fail 5 ${MAXTEST} "Encryption backward compat";
291 fi
292 #
293 if [ -n "$cleanup" ]; then
294 rm -f ./rc.${SH_LOCALHOST}
295 rm -f ./file.${SH_LOCALHOST}
296 ALTHOST=`find_hostname`
297 rm -f "./file.${ALTHOST}"
298 rm -f "./rc.${ALTHOST}"
299 fi
300 #
301 log_end "RUN FULL CLIENT/SERVER"
302}
303
Note: See TracBrowser for help on using the repository browser.