source: trunk/test/testrun_2a.sh@ 27

Last change on this file since 27 was 27, checked in by rainer, 19 years ago

Support for server-to-server relay and more user policies
File size: 7.9 KB
RevLine 
[1]1#! /bin/sh
2
[27]3#
4# Copyright Rainer Wichmann (2006)
5#
6# License Information:
7# This program is free software; you can redistribute it and/or modify
8# it under the terms of the GNU General Public License as published by
9# the Free Software Foundation; either version 2 of the License, or
10# (at your option) any later version.
11#
12# This program is distributed in the hope that it will be useful,
13# but WITHOUT ANY WARRANTY; without even the implied warranty of
14# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15# GNU General Public License for more details.
16#
17# You should have received a copy of the GNU General Public License
18# along with this program; if not, write to the Free Software
19# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20#
21
[19]22LOGFILE="$PW_DIR/.samhain_log"; export LOGFILE
23RCFILE="$PW_DIR/testrc_2"; export RCFILE
[1]24
[19]25SERVER_BUILDOPTS="--quiet $TRUST --enable-network=server --prefix=$PW_DIR --localstatedir=$PW_DIR --with-config-file=REQ_FROM_SERVER$PW_DIR/testrc_2 --with-data-file=REQ_FROM_SERVER$PW_DIR/.samhain_file --with-logserver=${SH_LOCALHOST} --with-log-file=$PW_DIR/.samhain_log --with-pid-file=$PW_DIR/.samhain_lock"; export SERVER_BUILDOPTS
[1]26
[19]27CLIENT_BUILDOPTS="--quiet $TRUST --enable-debug --enable-network=client --enable-srp --prefix=$PW_DIR --localstatedir=$PW_DIR --with-config-file=REQ_FROM_SERVER$RCFILE --with-data-file=REQ_FROM_SERVER$PW_DIR/.samhain_file --with-logserver=localhost --with-log-file=$LOGFILE --with-pid-file=$PW_DIR/.samhain_lock"; export CLIENT_BUILDOPTS
[1]28
[19]29do_test_1_a () {
[1]30
[19]31 [ -z "$verbose" ] || {
32 echo;
33 echo "${S}Start Server${E}: ./yule -l info -p none &";
34 echo;
35 }
[22]36 rm -f test_log_valgrind
37
38 ${VALGRIND} ./yule -l info -p none >/dev/null 2>>test_log_valgrind &
[19]39 PROC_Y=$!
40 sleep 5
[1]41
[19]42 [ -z "$verbose" ] || {
43 echo;
44 echo "${S}Start Client${E}: ./samhain.new -l none -p none -e info -t check";
45 echo;
46 }
47
[22]48 ${VALGRIND} ./samhain.new -t check -p none -l none -e info --bind-address=127.0.0.1 >/dev/null 2>>test_log_valgrind
[19]49 if test x$? = x0; then
50 [ -z "$verbose" ] || log_msg_ok "samhain.new -t check";
[1]51 else
[19]52 [ -z "$quiet" ] && log_msg_fail "samhain.new -t check";
53 kill $PROC_Y
54 return 1
[1]55 fi
56
[19]57 kill $PROC_Y
58 sleep 5
[1]59
[19]60 egrep "START(>|\").*Yule(>|\")" $LOGFILE >/dev/null 2>&1
61 if [ $? -ne 0 ]; then
62 [ -z "$verbose" ] || log_msg_fail "Server start";
63 return 1
64 fi
65 egrep "NEW CLIENT" $LOGFILE >/dev/null 2>&1
66 if [ $? -ne 0 ]; then
67 [ -z "$verbose" ] || log_msg_fail "Client connect";
68 return 1
69 fi
70 egrep "Checking.*/etc" $LOGFILE >/dev/null 2>&1
71 if [ $? -ne 0 ]; then
72 [ -z "$verbose" ] || log_msg_fail "Client file check";
73 return 1
74 fi
75 egrep "EXIT.*Samhain" $LOGFILE >/dev/null 2>&1
76 if [ $? -ne 0 ]; then
77 [ -z "$verbose" ] || log_msg_fail "Client exit";
78 return 1
79 fi
80 egrep "EXIT.*Yule.*SIGTERM" $LOGFILE >/dev/null 2>&1
81 if [ $? -ne 0 ]; then
82 [ -z "$verbose" ] || log_msg_fail "Server exit";
83 return 1
84 fi
85
[22]86 [ -z "$VALGRIND" ] || {
87 tmp=`cat test_log_valgrind 2>/dev/null | wc -l`;
88 if [ $tmp -ne 0 ]; then
89 [ -z "$verbose" ] || log_msg_fail "valgrind reports errors";
90 cat test_log_valgrind
91 return 1;
92 fi;
93 }
[1]94
[19]95 return 0
96}
[1]97
[19]98testrun2a_internal ()
[1]99{
[19]100 [ -z "$verbose" ] || {
101 echo;
102 echo Working directory: $PW_DIR; echo MAKE is $MAKE;
103 echo;
104 }
[1]105 #
106 #
[19]107 [ -z "$verbose" ] || { echo; echo "${S}Building client and server${E}"; echo; }
[1]108 #
109 if test -r "Makefile"; then
110 $MAKE distclean
111 fi
112 #
[19]113 ${TOP_SRCDIR}/configure ${CLIENT_BUILDOPTS}
[1]114 #
115 if test x$? = x0; then
[19]116 [ -z "$verbose" ] || log_msg_ok "configure...";
117 $MAKE > /dev/null 2>>test_log
[1]118 if test x$? = x0; then
[19]119 [ -z "$verbose" ] || log_msg_ok "make...";
[1]120 else
[19]121 [ -z "$quiet" ] && log_msg_fail "make...";
122 return 1
[1]123 fi
124
125 else
[19]126 [ -z "$quiet" ] && log_msg_fail "configure...";
127 return 1
[1]128 fi
129
130 # save binary and build server
131 #
[19]132 cp samhain samhain.build || return 1
133 make clean >/dev/null || return 1
[1]134
[19]135 ${TOP_SRCDIR}/configure ${SERVER_BUILDOPTS}
[1]136 #
137 if test x$? = x0; then
[19]138 [ -z "$verbose" ] || log_msg_ok "configure...";
139 $MAKE > /dev/null 2>>test_log
[1]140 if test x$? = x0; then
[19]141 [ -z "$verbose" ] || log_msg_ok "make...";
[1]142 else
[19]143 [ -z "$quiet" ] && log_msg_fail "make...";
144 return 1
[1]145 fi
146
147 else
[19]148 [ -z "$quiet" ] && log_msg_fail "configure...";
149 return 1
[1]150 fi
151
152
[19]153 #####################################################################
154 #
155 #
[1]156 rm -f ./.samhain_file
157 rm -f ./.samhain_log
158 rm -f ./.samhain_lock
159 rm -f ./rc.${SH_LOCALHOST}
160 rm -f ./file.${SH_LOCALHOST}
[25]161 rm -f "./rc.${ALTHOST}"
162 rm -f "./file.${ALTHOST}"
[1]163
164 cp ${SCRIPTDIR}/testrc_2.in testrc_2
165
[19]166 ./samhain.build -t init -p none
[1]167
[19]168 if test x$? = x0; then
169 [ -z "$verbose" ] || log_msg_ok "init...";
170 else
171 [ -z "$quiet" ] && log_msg_fail "init...";
172 return 1
173 fi
[1]174
175 # Create a password
176
177 SHPW=`./yule -G`
178 if test x"$SHPW" = x; then
[19]179 [ -z "$quiet" ] && log_msg_fail "password not generated -- aborting"
180 return 1
[1]181 fi
182
183 # Set in client
184
[19]185 ./samhain_setpwd samhain.build new $SHPW >/dev/null
[1]186
[19]187 if test x$? = x0; then
188 [ -z "$verbose" ] || log_msg_ok "./samhain_setpwd samhain.build new $SHPW";
189 else
190 [ -z "$quiet" ] && log_msg_fail "./samhain_setpwd samhain.build new $SHPW";
191 return 1
192 fi
[1]193
[19]194 mv samhain.build.new samhain.new || return 1
195
196 rm -f ./.samhain_log*
[1]197 rm -f ./.samhain_lock
198
199 SHCLT=`./yule -P $SHPW | sed s%HOSTNAME%${SH_LOCALHOST}%`
200
[19]201 if test x$? = x0; then
202 [ -z "$verbose" ] || log_msg_ok "yule -P $SHPW";
203 else
204 [ -z "$quiet" ] && log_msg_fail "yule -P $SHPW";
205 return 1
206 fi
207
[1]208 echo $SHCLT >> testrc_2
209
[19]210 cp ./testrc_2 ./rc.${SH_LOCALHOST}
211 mv ./.samhain_file ./file.${SH_LOCALHOST}
[1]212
[19]213 ALTHOST=`find_hostname`
214 cp ./testrc_2 "./rc.${ALTHOST}"
215 cp ./file.${SH_LOCALHOST} "./file.${ALTHOST}" 2>/dev/null
[1]216
217}
218
[25]219MAXTEST=5; export MAXTEST
[19]220
221testrun2a ()
222{
223 log_start "RUN FULL CLIENT/SERVER";
224 #
225 if [ x"$1" = x ]; then
226 [ -z "$quiet" ] && log_msg_fail "Missing hostname"
[1]227 fi
[19]228 #
[1]229 SH_LOCALHOST=$1; export SH_LOCALHOST
[19]230 #
231 testrun2a_internal
232 do_test_1_a
233 if [ $? -eq 0 ]; then
234 [ -z "$quiet" ] && log_ok 1 ${MAXTEST} "Client download+logging";
235 else
236 [ -z "$quiet" ] && log_fail 1 ${MAXTEST} "Client download+logging";
237 fi
238 #
[25]239 SERVER_BUILDOPTS_ORIG="${SERVER_BUILDOPTS}"
240 CLIENT_BUILDOPTS_ORIG="${CLIENT_BUILDOPTS}"
241 #
242 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG} --disable-srp"
243 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --disable-srp"
244 #
245 testrun2a_internal
246 do_test_1_a
247 if [ $? -eq 0 ]; then
248 [ -z "$quiet" ] && log_ok 2 ${MAXTEST} "SRP disabled";
249 else
250 [ -z "$quiet" ] && log_fail 2 ${MAXTEST} "SRP disabled";
251 fi
252 #
253 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG} --disable-encrypt"
254 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --disable-encrypt"
255 #
256 testrun2a_internal
257 do_test_1_a
258 if [ $? -eq 0 ]; then
259 [ -z "$quiet" ] && log_ok 3 ${MAXTEST} "Encryption disabled";
260 else
261 [ -z "$quiet" ] && log_fail 3 ${MAXTEST} "Encryption disabled";
262 fi
263 #
264 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG} --enable-encrypt=1"
265 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --enable-encrypt=1"
266 #
267 testrun2a_internal
268 do_test_1_a
269 if [ $? -eq 0 ]; then
270 [ -z "$quiet" ] && log_ok 4 ${MAXTEST} "Encryption (v1)";
271 else
272 [ -z "$quiet" ] && log_fail 4 ${MAXTEST} "Encryption (v1)";
273 fi
274 #
275 SERVER_BUILDOPTS="${SERVER_BUILDOPTS_ORIG}"
276 CLIENT_BUILDOPTS="${CLIENT_BUILDOPTS_ORIG} --enable-encrypt=1"
277 #
278 testrun2a_internal
279 do_test_1_a
280 if [ $? -eq 0 ]; then
281 [ -z "$quiet" ] && log_ok 5 ${MAXTEST} "Encryption backward compat";
282 else
283 [ -z "$quiet" ] && log_fail 5 ${MAXTEST} "Encryption backward compat";
284 fi
285 #
[19]286 if [ -n "$cleanup" ]; then
287 rm -f ./rc.${SH_LOCALHOST}
288 rm -f ./file.${SH_LOCALHOST}
289 ALTHOST=`find_hostname`
290 rm -f "./file.${ALTHOST}"
291 rm -f "./rc.${ALTHOST}"
292 fi
293 #
294 log_end "RUN FULL CLIENT/SERVER"
295}
[1]296
Note: See TracBrowser for help on using the repository browser.