#! /bin/sh

LOGFILE="$PW_DIR/.samhain_log"; export LOGFILE
RCFILE="$PW_DIR/testrc_2";  export RCFILE


do_test_1 () {

	[ -z "$verbose" ] || { 
	    echo; 
	    echo "${S}Start Server${E}: ./yule -l info -p none &"; 
	    echo; 
	}
	./yule -l info -p none >/dev/null 2>&1 &
	PROC_Y=$!
	sleep 5

	[ -z "$verbose" ] || { 
	    echo; 
	    echo "${S}Start Client${E}: ./samhain.new -l none -p none -e info -t check"; 
	    echo; 
	}

	./samhain.new -t check -p none -l none -e info --bind-address=127.0.0.1 >/dev/null 2>&1
	if test x$? = x0; then
	    [ -z "$verbose" ] || log_msg_ok    "samhain.new -t check";
	else
	    [ -z "$quiet" ]   && log_msg_fail  "samhain.new -t check";
	    kill $PROC_Y
	    return 1
	fi

	kill $PROC_Y
	sleep 5

	egrep "START(>|\").*Yule(>|\")" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Server start";
	    return 1
	fi
	egrep "NEW CLIENT" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client connect";
	    return 1
	fi
	egrep "remote_host.*Checking.*/bin" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client file check";
	    return 1
	fi
	egrep "remote_host.*EXIT.*Samhain" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client exit";
	    return 1
	fi
	egrep "EXIT.*Yule.*SIGTERM" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Server exit";
	    return 1
	fi
	

	return 0
}

do_test_2 () {

        ORIGINAL="UseSeparateLogs=no"
	REPLACEMENT="UseSeparateLogs=yes"
        ex $RCFILE <<EOF
:%s/$ORIGINAL/$REPLACEMENT/g
:wq
EOF
# :%s is the "ex" substitution command.
# :wq is write-and-quit.
	[ -z "$verbose" ] || { 
	    echo; 
	    echo "${S}Start Server${E}: ./yule -l info -p none &"; 
	    echo; 
	}

	rm -f $LOGFILE

	./yule -l info -p none >/dev/null 2>&1 &
	PROC_Y=$!
	sleep 5

	[ -z "$verbose" ] || { 
	    echo; 
	    echo "${S}Start Client${E}: ./samhain.new -l none -p none -e info -t check"; 
	    echo; 
	}

	./samhain.new -t check -p none -l none -e info --bind-address=127.0.0.1 >/dev/null 2>&1
	if test x$? = x0; then
	    [ -z "$verbose" ] || log_msg_ok    "samhain.new -t check";
	else
	    [ -z "$quiet" ]   && log_msg_fail  "samhain.new -t check";
	    kill $PROC_Y
	    return 1
	fi

	kill $PROC_Y
	sleep 5

	if [ -f ${LOGFILE}.${SH_LOCALHOST} ]; then
	    remhost=${SH_LOCALHOST}
	else
	    remhost=`echo $SH_LOCALHOST | sed 's,\..*,,'`
	fi
	if [ -f ${LOGFILE}.${remhost} ]; then
	    CLIENTLOG="${LOGFILE}.${remhost}"
	else
	    CLIENTLOG=`ls -1 ${LOGFILE}.* | tail -n 1`
	fi

	egrep "START(>|\").*Yule(>|\")" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Server start";
	    return 1
	fi
	egrep "NEW CLIENT" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client connect";
	    return 1
	fi
	egrep "remote_host.*Checking.*/bin" ${CLIENTLOG} >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client file check";
	    return 1
	fi
	egrep "remote_host.*EXIT.*Samhain" ${CLIENTLOG} >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client exit";
	    return 1
	fi
	egrep "EXIT.*Yule.*SIGTERM" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Server exit";
	    return 1
	fi
	
	rm -f ${LOGFILE}.${remhost}
	return 0
}

do_test_3 () {

        ORIGINAL_1="ExportSeverity=none"
        REPLACEMENT_1="ExportSeverity=mark"
	ORIGINAL_2="UseSeparateLogs=yes"
	REPLACEMENT_2="UseSeparateLogs=no"
	ORIGINAL_3="LogSeverity=none"
	REPLACEMENT_3="LogSeverity=debug"
	ORIGINAL_4="# SetClientTimeLimit=1800"
	REPLACEMENT_4="SetClientTimeLimit=20"
        ex $RCFILE <<EOF
:%s/${ORIGINAL_1}/${REPLACEMENT_1}/g
:%s/${ORIGINAL_2}/${REPLACEMENT_2}/g
:%s/${ORIGINAL_3}/${REPLACEMENT_3}/g
:%s/${ORIGINAL_4}/${REPLACEMENT_4}/g
:wq
EOF
# :%s is the "ex" substitution command.
# :wq is write-and-quit.
	[ -z "$verbose" ] || { 
	    echo; 
	    echo "${S}Start Server${E}: ./yule -p none &"; 
	    echo; 
	}

	rm -f $LOGFILE

	./yule -p none >/dev/null 2>&1 &
	PROC_Y=$!
	sleep 5

	[ -z "$verbose" ] || { 
	    echo; 
	    echo "${S}Start Client${E}: ./samhain.new -l none -p none -t check"; 
	    echo; 
	}

	./samhain.new -t check -p none -l none --forever --bind-address=127.0.0.1 >/dev/null 2>&1 &
	if test x$? = x0; then
	    PROC_S=$!
	    # echo "PID is ${PROC_S}"
	    [ -z "$verbose" ] || log_msg_ok    "samhain.new -t check";
	    sleep 5
	    # Redirect the shells (un-)helpful job monitoring messages.
	    # The 'disown' buildin is not portable. 
	    { kill -9 ${PROC_S}; sleep 40; } >/dev/null 2>&1
	else
	    [ -z "$quiet" ]   && log_msg_fail  "samhain.new -t check";
	    kill $PROC_Y
	    return 1
	fi

	if [ -t 0 ]; then
	    # enable monitor mode again if interactive
	    set -m
	fi


	kill $PROC_Y
	sleep 5

	egrep "START(>|\").*Yule(>|\")" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Server start";
	    return 1
	fi
	egrep "NEW CLIENT" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client connect";
	    return 1
	fi
	egrep "remote_host.*File check completed.*" ${LOGFILE} >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client file check";
	    return 1
	fi
	egrep "Time limit exceeded" ${LOGFILE} >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Client dead detection";
	    return 1
	fi
	egrep "EXIT.*Yule.*SIGTERM" $LOGFILE >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    [ -z "$verbose" ] || log_msg_fail "Server exit";
	    return 1
	fi
	
	rm -f ${LOGFILE}.${remhost}
	return 0
}

testrun2_internal ()
{
        [ -z "$verbose" ] || { 
	    echo; 
	    echo Working directory: $PW_DIR; echo MAKE is $MAKE; 
	    echo; 
	}
	#
	#
	[ -z "$verbose" ] || { echo; echo "${S}Building client and server${E}"; echo; }
	#
	if test -r "Makefile"; then
		$MAKE distclean
	fi
	#
	${TOP_SRCDIR}/configure --quiet  $TRUST --enable-debug --enable-network=client  --enable-xml-log --enable-login-watch --prefix=$PW_DIR --localstatedir=$PW_DIR --with-config-file=$RCFILE  --with-log-file=$LOGFILE --with-pid-file=$PW_DIR/.samhain_lock --with-data-file=$PW_DIR/.samhain_file --enable-encrypt=2
	#
	if test x$? = x0; then
		[ -z "$verbose" ] ||     log_msg_ok "configure..."; 
		$MAKE  > /dev/null 2>>test_log
		if test x$? = x0; then
		    [ -z "$verbose" ] || log_msg_ok "make..."; 
		else
		    [ -z "$quiet" ] &&   log_msg_fail "make..."; 
		    return 1
		fi

	else
		[ -z "$quiet" ] &&       log_msg_fail "configure...";
		return 1
	fi

	# save binary and build server
	#
	cp samhain samhain.build || return 1
	make clean >/dev/null || return 1

	${TOP_SRCDIR}/configure --quiet  $TRUST --enable-debug --enable-network=server  --enable-xml-log --enable-login-watch --prefix=$PW_DIR --localstatedir=$PW_DIR --with-config-file=$RCFILE  --with-log-file=$LOGFILE --with-pid-file=$PW_DIR/.samhain_lock --with-data-file=$PW_DIR/.samhain_file --enable-identity=rainer --enable-encrypt=2
	#
	if test x$? = x0; then
		[ -z "$verbose" ] ||     log_msg_ok "configure..."; 
		$MAKE  > /dev/null 2>>test_log
		if test x$? = x0; then
		    [ -z "$verbose" ] || log_msg_ok "make..."; 
		else
		    [ -z "$quiet" ] &&   log_msg_fail "make..."; 
		    return 1
		fi

	else
		[ -z "$quiet" ] &&       log_msg_fail "configure...";
		return 1
	fi


	#####################################################################
	#
	#
	rm -f ./.samhain_file
	rm -f ./.samhain_log
	rm -f ./.samhain_lock

	cp ${SCRIPTDIR}/testrc_2.in testrc_2

	./samhain.build -t init -p none

	if test x$? = x0; then
	    [ -z "$verbose" ] || log_msg_ok    "init...";
	else
	    [ -z "$quiet" ]   && log_msg_fail  "init...";
	    return 1
	fi

	# Create a password

	SHPW=`./yule -G`
	if test x"$SHPW" = x; then
	    [ -z "$quiet" ]   && log_msg_fail  "password not generated -- aborting"
	    return 1
	fi

	# Set in client

	./samhain_setpwd samhain.build new $SHPW >/dev/null

	if test x$? = x0; then
	    [ -z "$verbose" ] || log_msg_ok    "./samhain_setpwd samhain.build new $SHPW";
	else
	    [ -z "$quiet" ]   && log_msg_fail  "./samhain_setpwd samhain.build new $SHPW";
	    return 1
	fi

	mv samhain.build.new  samhain.new || return 1

	rm -f ./.samhain_log.*
	rm -f ./.samhain_lock

	SHCLT=`./yule -P $SHPW | sed s%HOSTNAME%${SH_LOCALHOST}%`

	if test x$? = x0; then
	    [ -z "$verbose" ] || log_msg_ok    "yule -P $SHPW";
	else
	    [ -z "$quiet" ]   && log_msg_fail  "yule -P $SHPW";
	    return 1
	fi

 	echo $SHCLT >> testrc_2

	do_test_1
	if [ $? -eq 0 ]; then
	    [ -z "$quiet" ] && log_ok   1 ${MAXTEST} "Client logging";
	else
	    [ -z "$quiet" ] && log_fail 1 ${MAXTEST} "Client logging";
	fi

	do_test_2
	if [ $? -eq 0 ]; then
	    [ -z "$quiet" ] && log_ok   2 ${MAXTEST} "Client logging, seperate logfiles";
	else
	    [ -z "$quiet" ] && log_fail 2 ${MAXTEST} "Client logging, seperate logfiles";
	fi

	do_test_3
	if [ $? -eq 0 ]; then
	    [ -z "$quiet" ] && log_ok   3 ${MAXTEST} "Dead client detection";
	else
	    [ -z "$quiet" ] && log_fail 3 ${MAXTEST} "Dead client detection";
	fi

	return $?
}

MAXTEST=3; export MAXTEST

testrun2 ()
{
    log_start "RUN CLIENT/SERVER"

    if [ x"$1" = x ]; then
	[ -z "$quiet" ] && log_msg_fail "Missing hostname"
    fi
    #
    SH_LOCALHOST=$1; export SH_LOCALHOST
    #
    testrun2_internal
    #
    log_end "RUN CLIENT/SERVER"

    return 0
}