source: trunk/scripts/redhat_i386.client.spec.in@ 81

#
# Accepted parameters for 'rpmbuild':
#
# --with tests          - make tests before building

Summary: File integrity and host-based IDS
Name: samhain-client
Version: @VERSION@
Release: 5
License: GPL
Group: System Environment/Base
Source: %{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/samhain-client-%{version}-root
Packager: Andre Oliveira da Costa <brblueser@uol.com.br>
Provides: %{name}


%description
samhain is an open source file integrity and host-based intrusion
detection system for Linux and Unix. It can run as a daemon process, and
and thus can remember file changes -- contrary to a tool that runs from
cron, if a file is modified you will get only one report, while
subsequent checks of that file will ignore the modification as it is
already reported (unless the file is modified again). 

samhain can optionally be used as client/server system to provide
centralized monitoring for multiple host. Logging to a (MySQL or
PostgreSQL) database is supported.

NOTE: for security reasons, if you distribute binary executables to
third parties you should point out the use of the --add-key option to
modify the key material within the executable.
This spec file is intended to facilitate installation on YOUR system.
If you use this spec file to build a SRPM for distribution to third parties,
make sure to remove the --enable-base configure option below.

%prep
%setup -q

%build
%if %{?_with_tests:1}%{!?_with_tests:0}
# test installation (test #7 is only included if --with gpg has been
# specified)
for i in `seq 6` %{?_with_gpg:7}; do ./test/test.sh $i; done
%endif
#
#./configure --prefix=%{_usr} \
#            --sysconfdir=%{_sysconfdir} \
#            --localstatedir=%{_localstatedir} \
#            --mandir=%{_mandir} 
#
./configure     '--enable-network=client' \
                '--with-port=@myport@' \
                '--with-logserver=@mylogsrv@' \
                '--with-data-file=REQ_FROM_SERVER/etc/samclient.data' \
                '--with-config-file=REQ_FROM_SERVER/etc/samclient.conf' \
                '--with-kcheck=/boot/System.map' \
                '--enable-khide=/boot/System.map' \
                '--enable-suidcheck' \
                '--enable-static' \
                '--enable-login-watch' \
                '--enable-ptrace' \
                '--enable-db-reload' \
                '--enable-base=@my_key_A@,@my_key_B@' \
                '--enable-xml-log' 

make

%install
rm -rf ${RPM_BUILD_ROOT}
# sstrip shouldn't be used since binaries will be stripped later
cat << EOF > sstrip
#!/bin/sh
echo "*** SSTRIP DISABLED ***"
EOF
make DESTDIR=${RPM_BUILD_ROOT} install
# copy script files to /var/lib/samhain so that we can use them right
# after the package is installed
install -m 700 samhain-install.sh init/samhain.startLinux init/samhain.startLSB ${RPM_BUILD_ROOT}/etc
install -m 640 -o 0 -g 0 samhain_hide.o         ${RPM_BUILD_ROOT}/lib/modules/`uname -r`/samhain_hide.o
install -m 640 -o 0 -g 0 samhain_erase.o        ${RPM_BUILD_ROOT}/lib/modules/`uname -r`/samhain_erase.o
install -m 700 -o 0 -g 0 samhain_setpwd         ${RPM_BUILD_ROOT}/usr/local/sbin/samhain_setpwd

%clean
rm -rf ${RPM_BUILD_ROOT}

%post
if [ "$1" = 1 ]; then
        # Activate boot-time start up
        cd /etc
        ./samhain-install.sh --verbose install-boot
        if test -f /sbin/chkconfig; then
                /sbin/chkconfig --add samhain
        fi
fi
rm -rf /etc/samclient.conf
rm -rf /etc/samhain.startLinux
rm -rf /etc/samhain.startLSB

cat << EOF

Samhain is installed but is NOT running yet, and the database of
file signatures is NOT initialized yet. Read the documentation,
review configuration files, and then (i) initialize it
(/usr/local/sbin/samhain -t init) 
and (ii) start it manually
(/usr/local/sbin/samhain start).

It is configured to start automatically on the next boot for runlevels
[2-5].

EOF

%preun
# stop running instance of samhain, if any
if [ -f /var/run/%{name}.pid ]; then
        /usr/local/sbin/samhain stop
fi
if [ "$1" = 0 ]; then
        # remove boot-time scripts and links
        cd /etc
        ./samhain-install.sh --verbose uninstall-boot
fi

%postun
if [ "$1" = 0 ]; then
        # remove any kernel modules that might have been installed
        RVER=`uname -r`
        rm -f /lib/modules/$RVER/samhain*
fi


%files
%defattr(-,root,root)
%dir /var/run
%dir /var/log
#%doc docs/BUGS COPYING docs/Changelog docs/TODO
#%doc LICENSE docs/HOWTO* docs/MANUAL-2_3.* docs/README*
/etc
/usr/local/sbin/samhain
/usr/local/sbin/samhain_setpwd
/lib/modules
#%attr(644,root,root) /usr/local/man/man5/samhain*
#%attr(644,root,root) /usr/local/man/man8/samhain*
#%config(noreplace) REQ_FROM_SERVER/etc/samclient.conf

%changelog
* Thu Apr  3 2003 Rainer Wichmann <support at la-samhna dot de>
- adapt for configure

* Wed Mar 26 2003 Philipp Stadler <philipp@stadler.priv.at>
- add samhain modules installation
- stops installation of documentation to server
- replace %config entry for /etc/samclient.conf
- remove samhain.startLinux and samhain.startLSB after installation

* Sun Jan 12 2003 Rainer Wichmann <support at la-samhna dot de>
- replace %configure with ./configure

* Tue Dec 24 2002 Rainer Wichmann <support at la-samhna dot de>
- backported applicable changes to samhain.spec.in
- warn user that database must be initialized
- fix version of MANUAL in '%files'
- test for chkconfig, use only if found

* Sun Dec 22 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.7.0
- fixed typo with _usr macro on ./configure
- stops running samhain before uninstall
- implemented conditionals to allow proper uninstalls/upgrades
- 'BuildPreReq: gpg' is considered only if '--with gpg' is provided
- run 'chkconfig' to activate samhain after installation
- warn user that samhain must be manually started after
  install/upgrade

* Fri Dec 20 2002 Rainer Wichmann <support at la-samhna dot de>
- backported to samhain.spec.in (take over user's choices from configure)
- also save samhain.startLSB and samhain.startSuSE for install-boot 

* Thu Dec 19 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.6.6
- optional parameters '--with gpg' and '--with tests'
- use of pre-defined macros whenever possible

* Wed Dec 18 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.6.6
- Fixed installation process, avoiding hardcoded paths on the binaries
  (thks to samhain's author Rainer Wichmann)

* Mon Dec 16 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.6.6
- First attempt to build from sources