source: trunk/samhainrc.linux@ 11

#####################################################################
#
# Configuration file template for samhain.
#
#####################################################################
# 
# -- empty lines and lines starting with '#', ';' or '//' are ignored
# -- boolean options can be Yes/No or True/False or 1/0 
# -- you can PGP clearsign this file -- samhain will check (if compiled
#    with support) or otherwise ignore the signature
# -- CHECK mail address
#
# To each log facility, you can assign a threshold severity. Only
# reports with at least the threshold severity will be logged
# to the respective facility (even further below).
#
#####################################################################
#
# SETUP for file system checking:
# 
# (i)   There are several policies, each has its own section. Put files
#       into the section for the appropriate policy (see below).
# (ii)  Section [EventSeverity]: 
#       To each policy, you can assign a severity (further below).
# (iii) Section [Log]: 
#       To each log facility, you can assign a threshold severity. Only
#       reports with at least the threshold severity will be logged
#       to the respective facility (even further below).
#
#####################################################################

#####################################################################
#
# Files are defined with: file = /absolute/path
#
# Directories are defined with:                  dir = /absolute/path
# or with an optional recursion depth (N <= 99): dir = N/absolute/path
#
# Directory inodes are checked. If you only want to check files
# in a directory, but not the directory inode itself, use (e.g.):
#
# [ReadOnly]
# dir = /some/directory
# [IgnoreAll]
# file = /some/directory
#
# You can use shell-style globbing patterns, like: file = /path/foo*
# 
######################################################################

[Misc]
##
## Add or subtract tests from the policies
## - if you want to change their definitions,
##   you need to do that before using the policies
##
# RedefReadOnly = (no default)
# RedefAttributes=(no default)
# RedefLogFiles=(no default)
# RedefGrowingLogFiles=(no default)
# RedefIgnoreAll=(no default)
# RedefIgnoreNone=(no default)

# RedefUser0=(no default)
# RedefUser1=(no default)

#
# --------- / --------------
#

[ReadOnly]
dir = 0/

#
# --------- /etc -----------
#

[ReadOnly]
##
## for these files, only access time is ignored
##
dir = 99/etc

[Attributes]
##
## check permission and ownership
##
file = /etc/mtab
file = /etc/adjtime
file = /etc/motd
file = /etc/lvm/.cache

# On Ubuntu, these are in /var/lib rather than /etc
file = /etc/cups/certs
file = /etc/cups/certs/0

# managed by fstab-sync on Fedora Core
file = /etc/fstab

# modified when booting 
file = /etc/sysconfig/hwconf

# There are files in /etc that might change, thus changing the directory
# timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'.

file = /etc

#
# --------- /boot -----------
#

[ReadOnly]
dir = 99/boot

#
# --------- /bin, /sbin -----------
#

[ReadOnly]
dir = 99/bin
dir = 99/sbin

#
# --------- /lib -----------
#

[ReadOnly]
dir = 99/lib

#
# --------- /dev -----------
#

[Attributes]
dir = 99/dev

[IgnoreAll]
##
## pseudo terminals are created/removed as needed
##
dir = -1/dev/pts

# dir = -1/dev/.udevdb

file = /dev/ppp

#
# --------- /usr -----------
#

[ReadOnly]
dir = 99/usr

#
# --------- /var -----------
#

[ReadOnly]
dir = 99/var

[IgnoreAll]
dir = -1/var/cache
dir = -1/var/backups
dir = -1/var/games
dir = -1/var/gdm
dir = -1/var/lock
dir = -1/var/mail
dir = -1/var/run
dir = -1/var/spool
dir = -1/var/tmp
dir = -1/var/lib/texmf

[Attributes]

dir = /var/lib/nfs
dir = /var/lib/pcmcia

# /var/lib/rpm changes if packets are installed;
# /var/lib/rpm/__db.00[123] even more frequently
file = /var/lib/rpm/__db.00?

file = /var/lib/acpi-support/vbestate
file = /var/lib/alsa/asound.state
file = /var/lib/apt/lists/lock
file = /var/lib/apt/lists/partial
file = /var/lib/cups/certs
file = /var/lib/cups/certs/0
file = /var/lib/dpkg/lock
file = /var/lib/gdm
file = /var/lib/gdm/.cookie
file = /var/lib/gdm/.gdmfifo
file = /var/lib/gdm/:0.Xauth
file = /var/lib/gdm/:0.Xservers
file = /var/lib/logrotate/status
file = /var/lib/mysql
file = /var/lib/mysql/ib_logfile0
file = /var/lib/mysql/ibdata1
file = /var/lib/slocate
file = /var/lib/slocate/slocate.db
file = /var/lib/slocate/slocate.db.tmp
file = /var/lib/urandom
file = /var/lib/urandom/random-seed
file = /var/lib/random-seed
file = /var/lib/xkb


[GrowingLogFiles]
##
## For these files, changes in signature, timestamps, and increase in size
## are ignored. Logfile rotation will cause a report because of shrinking
## size and different inode. 
##
dir = 99/var/log

[Attributes]
#
# rotated logs will change inode
#
file = /var/log/*.[0-9].gz
file = /var/log/*.[0-9].log
file = /var/log/*.[0-9]
file = /var/log/*.old
file = /var/log/*/*.[0-9].gz
file = /var/log/*/*.log.[0-9]

[Misc]
#
# Various naming schemes for rotated logs
#
IgnoreAdded = /var/log/.*\.[0-9]+$
IgnoreAdded = /var/log/.*\.[0-9]+\.gz$
IgnoreAdded = /var/log/.*\.[0-9]+\.log$
#
# Subdirectories
#
IgnoreAdded = /var/log/[[:alnum:]]+/.*\.[0-9]+$
IgnoreAdded = /var/log/[[:alnum:]]+/.*\.[0-9]+\.gz$
IgnoreAdded = /var/log/[[:alnum:]]+/.*\.[0-9]+\.log$
#
IgnoreAdded = /var/lib/slocate/slocate.db.tmp
IgnoreMissing = /var/lib/slocate/slocate.db.tmp

#
# --------- other policies -----------
#

[IgnoreNone]
##
## for these files, all modifications (even access time) are reported
##    - you may create some interesting-looking file (like /etc/safe_passwd),
##      just to watch whether someone will access it ...
##

[Prelink]
##
## Use for prelinked files or directories holding them
##


[User0]
[User1]
## User0 and User1 are sections for files/dirs with user-definable checking
## (see the manual) 



[EventSeverity]
##
## Here you can assign severities to policy violations.
## If this severity exceeds the treshold of a log facility (see below),
## a policy violation will be logged to that facility.
##
## Severity for verification failures.
##
# SeverityReadOnly=crit
# SeverityLogFiles=crit
# SeverityGrowingLogs=crit
# SeverityIgnoreNone=crit
# SeverityAttributes=crit
# SeverityUser0=crit
# SeverityUser1=crit
# SeverityIgnoreAll=crit


## Files : file access problems
# SeverityFiles=crit

## Dirs  : directory access problems
# SeverityDirs=crit

## Names : suspect (non-printable) characters in a pathname
# SeverityNames=crit

[Log]
##
## Switch on/OFF log facilities and set their threshold severity
##
## Values: debug, info, notice, warn, mark, err, crit, alert, none.
## 'mark' is used for timestamps.
##
##
## Use 'none' to SWITCH OFF a log facility
## 
## By default, everything equal to and above the threshold is logged.
## The specifiers '*', '!', and '=' are interpreted as  
## 'all', 'all but', and 'only', respectively (like syslogd(8) does, 
## at least on Linux). Examples:
## MailSeverity=*
## MailSeverity=!warn
## MailSeverity==crit

## E-mail
##
# MailSeverity=none

## Console
##
# PrintSeverity=info

## Logfile
##
# LogSeverity=mark

## Syslog
##
# SyslogSeverity=none

## Remote server (yule)
##
# ExportSeverity=none

## External script or program
##
# ExternalSeverity = none

## Logging to a database
##
# DatabaseSeverity = none

## Logging to a Prelude-IDS
##
# PreludeSeverity = crit



#####################################################
#
# Optional modules
#
#####################################################

# [SuidCheck]
##
## --- Check the filesystem for SUID/SGID binaries
## 

## Switch on
#
# SuidCheckActive = yes

## Interval for check (seconds)
#
# SuidCheckInterval = 7200

## Alternative: crontab-like schedule
#
# SuidCheckSchedule = NULL
 
## Directory to exclude 
#
# SuidCheckExclude = NULL

## Limit on files per second (0 == no limit)
#
# SuidCheckFps = 0

## Alternative: yield after every file
#
# SuidCheckYield = no

## Severity of a detection
#
# SeveritySuidCheck = crit

## Quarantine SUID/SGID files if found
#
# SuidCheckQuarantineFiles = yes

## Method for Quarantining files:
#  0 - Delete or truncate the file.
#  1 - Remove SUID/SGID permissions from file.
#  2 - Move SUID/SGID file to quarantine dir.
#
# SuidCheckQuarantineMethod = 0

## For method 1 and 3, really delete instead of truncating
# 
# SuidCheckQuarantineDelete = yes

#[Kernel]
##
## --- Check for loadable kernel module rootkits (Linux/FreeBSD only) 
##

## Switch on/off
#
# KernelCheckActive = True

## Check interval (seconds); btw., the check is VERY fast
#
# KernelCheckInterval = 300

## Severity
#
# SeverityKernel = crit


# [Utmp]
##
## --- Logging of login/logout events
##

## Switch on/off
#
# LoginCheckActive = True

## Severity for logins, multiple logins, logouts
# 
# SeverityLogin=info
# SeverityLoginMulti=warn
# SeverityLogout=info

## Interval for login/logout checks
#
# LoginCheckInterval = 300


# [Database]
##
## --- Logging to a relational database
##

## Database name
#
# SetDBName = samhain

## Database table
#
# SetDBTable = log

## Database user
#
# SetDBUser = samhain

## Database password
#
# SetDBPassword = (default: none)

## Database host
#
# SetDBHost = localhost

## Log the server timestamp for received messages
#
# SetDBServerTstamp = True

## Use a persistent connection
#
# UsePersistent = True

# [External]
##
## Interface to call external scripts/programs for logging
##

## The absolute path to the command
## - Each invocation of this directive will end the definition of the
##   preceding command, and start the definition of 
##   an additional, new command
#
# OpenCommand = (no default)

## Type (log or rv)
## - log for log messages, srv for messages received by the server
#
# SetType = log

## The command (full command line) to execute
#
# SetCommandLine = (no default)

## The environment (KEY=value; repeat for more)
#
# SetEnviron = TZ=(your timezone)

## The TIGER192 checksum (optional)
#
# SetChecksum = (no default)

## User who runs the command
#
# SetCredentials = (default: samhain process uid)

## Words not allowed in message
#
# SetFilterNot = (none)

## Words required (ALL of them)
#
# SetFilterAnd = (none)

## Words required (at least one)
#
# SetFilterOr = (none)

## Deadtime between consecutive calls
#
# SetDeadtime = 0

## Add default environment (HOME, PATH, SHELL)
#
# SetDefault = no


#####################################################
#
# Miscellaneous configuration options
#
#####################################################

[Misc]

## whether to become a daemon process
## (this is not honoured on database initialisation)
#
# Daemon = no
Daemon = yes

## whether to test signature of files (init/check/none)
## - if 'none', then we have to decide this on the command line -
#
# ChecksumTest = none
ChecksumTest=check

## Set nice level (-19 to 19, see 'man nice'),
## and I/O limit (kilobytes per second; 0 == off)
## to reduce load on host.
#
# SetNiceLevel = 0
# SetIOLimit = 0

## The version string to embed in file signature databases
#
# VersionString = NULL

## Interval between time stamp messages
#
# SetLoopTime = 60
SetLoopTime = 600

## Interval between file checks 
#
# SetFileCheckTime = 600
SetFileCheckTime = 7200

## Alternative: crontab-like schedule
#
# FileCheckScheduleOne = NULL

## Alternative: crontab-like schedule(2)
#
# FileCheckScheduleTwo = NULL

## Report only once on modified fles 
## Setting this to 'FALSE' will generate a report for any policy 
## violation (old and new ones) each time the daemon checks the file system.
#
# ReportOnlyOnce = True

## Report in full detail
#
# ReportFullDetail = False

## Report file timestamps in local time rather than GMT
#
# UseLocalTime = No

## The console device (can also be a file or named pipe)
## - There are two console devices. Accordingly, you can use
##   this directive a second time to set the second console device.
##   If you have not defined the second device at compile time,
##   and you don't want to use it, then:
##   setting it to /dev/null is less effective than just leaving
##   it alone (setting to /dev/null will waste time by opening
##   /dev/null and writing to it)
#
# SetConsole = /dev/console

## Activate the SysV IPC message queue
#
# MessageQueueActive = False


## If false, skip reverse lookup when connecting to a host known 
## by name rather than IP address (i.e. trust the DNS)
#
# SetReverseLookup = True

## --- E-Mail ---

# Only highest-level (alert) reports will be mailed immediately,
# others will be queued. Here you can define, when the queue will
# be flushed (Note: the queue is automatically flushed after
# completing a file check).
#
# SetMailTime = 86400

## Maximum number of mails to queue
#
# SetMailNum = 10

## Recipient (max. 8)
#
# SetMailAddress=root@localhost

## Mail relay (IP address)
#
# SetMailRelay = NULL

## Custom subject format
#
# MailSubject = NULL

## --- end E-Mail ---

## Path to the prelink executable
#
# SetPrelinkPath = /usr/sbin/prelink

## TIGER192 checksum of the prelink executable
#
# SetPrelinkChecksum = (no default)


## Path to the executable. If set, will be checksummed after startup
## and before exit.
#
# SamhainPath = (no default)


## The IP address of the log server
#
# SetLogServer = (default: compiled-in)

## The IP address of the time server
#
# SetTimeServer = (default: compiled-in)

## Trusted Users (comma delimited list of user names) 
#
# TrustedUser = (no default; this adds to the compiled-in list)

## Path to the file signature database
#
# SetDatabasePath = (default: compiled-in)

## Path to the log file
#
# SetLogfilePath = (default: compiled-in)

## Path to the PID file
#
# SetLockPath = (default: compiled-in)


## The digest/checksum/hash algorithm
#
# DigestAlgo = TIGER192


## Custom format for message header. 
## CAREFUL if you use XML logfile format.
##
## %S severity
## %T timestamp
## %C class
##
## %F source file
## %L source line
#
# MessageHeader="%S %T "


## Don't log path to config/database file on startup
#
# HideSetup = False

## The syslog facility, if you log to syslog
#
# SyslogFacility = LOG_AUTHPRIV
SyslogFacility=LOG_LOCAL2

## The message authentication method
## - If you change this, you *must* change it
##   on client *and* server
#
# MACType = HMAC-TIGER


## The Prelude-IDS profile to use for reporting
## default value is "samhain"
#
# PreludeProfile = samhain

## Map these samhain severities to impact severity 'info' severity
#
# PreludeMapToInfo =

## Map these samhain severities to impact severity 'low' severity
#
# PreludeMapToLow = debug info

## Map these samhain severities to impact severity 'medium' severity
#
# PreludeMapToMedium = notice warn err

## Map these samhain severities to impact severity 'high' severity
#
# PreludeMapToHigh = crit alert


## everything below is ignored
[EOF]

#####################################################################
# This would be the proper syntax for parts that should only be
#    included for certain hosts.
# You may enclose anything in a @HOSTNAME/@end bracket, as long as the
#    result still has the proper syntax for the config file.
# You may have any number of @HOSTNAME/@end brackets.
# HOSTNAME should be the fully qualified 'official' name 
#    (e.g. 'nixon.watergate.com', not 'nixon'), no aliases. 
#    No IP number - except if samhain cannot determine the 
#    fully qualified hostname.
#
# @HOSTNAME
# file=/foo/bar
# @end
#
# These are two examples for conditional inclusion/exclusion
# of a machine based on the output from 'uname -srm'
# $Linux:2.*.7:i666
# file=/foo/bar3
# $end
#
# !$Linux:2.*.7:i686
# file=/foo/bar2
# $end
#
#####################################################################