source: trunk/samhain.spec.in@ 510

#
# Accepted parameters for 'rpmbuild':
#
# --with tests          - make tests before building

Summary: File integrity and host-based IDS
Name: @install_name@
Version: @VERSION@
Release: 1
License: GPL
Group: System Environment/Base
Source: samhain-%{version}.tar.gz
BuildRoot: %{_tmppath}/samhain-%{version}-root
Packager: Andre Oliveira da Costa <brblueser@uol.com.br>
Provides: %{name}
Requires(pre): shadow-utils

# dummy (fix configure warning)
# datarootdir = @datarootdir@

# no quotes here - aparently will be expanded literally

%define password %(echo $PASSWORD)

%define withpwd_prg x@clmytclient@
%define withstg_prg x@stegin_prg@

# disable automatic stripping of binaries upon installation
%define __spec_install_post %{nil}
# required because DeadRat wants to package some debug info otherwise
# (this debug info would be created by debug_install_post called
# from spec_install_post)
%define debug_package %{nil}
# Use internal dependency generator rather than external helpers?
%define _use_internal_dependency_generator     0

%description
@install_name@ is an open source file integrity and host-based intrusion
detection system for Linux and Unix. It can run as a daemon process, and
and thus can remember file changes -- contrary to a tool that runs from
cron, if a file is modified you will get only one report, while
subsequent checks of that file will ignore the modification as it is
already reported (unless the file is modified again). 

@install_name@ can optionally be used as client/server system to provide
centralized monitoring for multiple host. Logging to a (MySQL or
PostgreSQL) database is supported.

NOTE: for security reasons, if you distribute binary executables to
third parties you should point out the use of the --add-key option to
modify the key material within the executable.
This spec file is intended to facilitate installation on YOUR system.
If you use this spec file to build a SRPM for distribution to third parties,
make sure to remove the --enable-base configure option below.

%prep
%setup -q -n samhain-%{version}

%build
%if %{?_with_tests:1}%{!?_with_tests:0}
# test installation (test #7 is only included if --with gpg has been
# specified)
for i in `seq 6` %{?_with_gpg:7}; do ./test/test.sh $i; done
%endif
#
# configure with the user-supplied arguments to './configure'
#
./configure @mydefargs@ 
make
%if "%{withpwd_prg}" == "xDSH_WITH_CLIENT"
%if 0%{?password}
        ./samhain_setpwd samhain new %{password}
        mv samhain samhain.old
        mv samhain.new samhain
%endif
%endif


%install
rm -rf ${RPM_BUILD_ROOT}
# sstrip shouldn't be used since binaries will be stripped later
## cat << EOF > sstrip
## #!/bin/sh
## echo "*** SSTRIP DISABLED ***"
## EOF
make DESTDIR=${RPM_BUILD_ROOT} install
# copy script files to /var/lib/samhain so that we can use them right
# after the package is installed
#
install -m 700 samhain-install.sh init/samhain.startLinux init/samhain.startLSB ${RPM_BUILD_ROOT}@mydataroot@
#
# file list (helpful advice from Lars Kellogg-Stedman)
#
echo "@sbindir@/@install_name@" > sh_file_list
find %{buildroot}/lib/modules \! -type d -print | \
     sed 's,%{buildroot},,' >> sh_file_list

%clean
rm -rf ${RPM_BUILD_ROOT}

%pre
if test "x@install_name@" = "xyule"
then
    getent group samhain >/dev/null || groupadd -r samhain
    getent passwd yule >/dev/null || \
        useradd -r -g samhain -d  @mydataroot@ -s /sbin/nologin \
        -c "samhain server daemon" yule

fi
exit 0

%post
if test "x@sh_lkm@" = x; then
   :
else
   if test -f /sbin/depmod; then
     /sbin/depmod -a
   fi
fi
if [ "$1" -ge 1 ]; then
        # Activate boot-time start up
        cd @mydataroot@
        /bin/sh ./samhain-install.sh --verbose install-boot
        rm -f ./samhain.startLSB
        rm -f ./samhain.startLinux
        if [ -f @sbindir@/@install_name@_stealth ]; then
                rm -f samhain-install.sh
        fi
        shkeep=yes
        if test x"$shkeep" = xno; then
                rm -f ./samhain-install.sh
                rm -f @sbindir@/@install_name@_stealth
        fi
fi
if [ "$1" = 1 ]; then
        if test -f /usr/lib/lsb/install_initd; then
                /usr/lib/lsb/install_initd /etc/init.d/@install_name@
        fi
fi

%if "%{name}" != "yule"
cat << EOF

Samhain is installed but is NOT running yet, and the database of
file signatures is NOT initialized yet. Read the documentation,
review configuration files, and then (i) initialize it
(@sbindir@/samhain -t init) 
and (ii) start it manually
(@sbindir@/samhain start).

It is configured to start automatically on the next boot for runlevels
[2-5].

EOF
%endif
%if "%{name}" == "yule"
cat << EOF

Yule is installed but is NOT running yet, read the documentation,
review configuration files, and then start it
(@sbindir@/yule) 

It is configured to start automatically on the next boot for runlevels
[2-5].

EOF
%endif

%preun
# stop running instance of samhain, if any
if [ -f @mylockdir@/%{name}.pid ]; then
        @sbindir@/@install_name@ stop
fi
if [ "$1" = 0 ]; then
        # remove boot-time scripts and links
        cd @mydataroot@
        if [ -f ./samhain-install.sh ]; then
            /bin/sh ./samhain-install.sh --verbose uninstall-boot
        else
            if test -f /usr/lib/lsb/remove_initd; then
                /usr/lib/lsb/remove_initd /etc/init.d/@install_name@
            fi
            rm -f /etc/init.d/@install_name@
        fi
fi



%files -f sh_file_list
%defattr(-,root,root)
%dir @mylockdir@
%dir @mylogdir@
%doc docs/BUGS COPYING docs/Changelog 
%doc LICENSE docs/FAQ.html docs/HOWTO* docs/MANUAL-2_4.* docs/README*
@mydataroot@
%if "%{withstg_prg}" == "xsamhain_stealth"
        @sbindir@/@install_name@_stealth
%endif
%if "%{withpwd_prg}" == "xDSH_WITH_CLIENT"
        @sbindir@/@install_name@_setpwd
%endif
%if "%{withpwd_prg}" == "xDSH_WITH_SERVER"
        @sbindir@/@install_name@ctl
        %exclude @sbindir@/@install_name@_setpwd
%endif
%attr(644,root,root) @mandir@/man5/@install_name@*
%attr(644,root,root) @mandir@/man8/@install_name@*
%attr(644,root,root) /etc/logrotate.d/@install_name@
%if "%{name}" == "yule"
%attr(750,root,samhain) @mydataroot@ 
%attr(750,yule,samhain) @mylogdir@ 
%endif
%config(noreplace) @myrpmconffile@

%changelog
* Tue Oct 23 2012 Rainer Wichmann
- fixes for yule installation

* Tue May 16 2006 Rainer Wichmann
- fix manual version, noticed by Imre Gergely

* Tue Apr 05 2005 Rainer Wichmann
- disable automatic stripping, use sstrip

* Thu Mar 17 2005 Rainer Wichmann
- fixes for enable-khide

* Wed Oct 20 2004 Rainer Wichmann
- more fixes for client/server detection
- fix for samhain_stealth
 
* Sun Aug 15 2004 Rainer Wichmann
- fix detection of client/server

* Sat Jun 19 2004 Rainer Wichmann
- replace ./test.sh $i with make test$i
- add logic for rpm-light (remove some more files after install)
- make postun posix compliant (avoid empty argument list for rm -f)

* Wed Dec 31 2003 Stijn Jonker <sjcjonker@sjc.nl>
- Fixed correctly build of yule-*-rpm
- Fixed excluding of yule_setpwd, and including of yulectl on yule build
- Fixed including of samhain_setpwd in samhain client build
- Above changes required for correct build in newer rpms,
  with defaults for abort on unpacked files due to 
  %_unpackaged_files_terminate_build 1 setting
- Fixed installation text for yule, not to display samhain text
- Added /sbin/chkconfig install_name on to enable the rc scripts

* Thu Dec 11 2003 Christian Vanguers  <cva at molis dot be>
- Fixed typo in samhain.spec
- Compiled on RedHat Enterprise Linux ES 3

* Thu Mar 26 2003 Rainer Wichmann
- strip REQ_FROM_SERVER in config file path (%config(noreplace) ...)

* Sun Jan 12 2003 Rainer Wichmann <support at la-samhna dot de>
- replace %configure with ./configure

* Tue Dec 24 2002 Rainer Wichmann <support at la-samhna dot de>
- backported applicable changes to samhain.spec.in
- warn user that database must be initialized
- fix version of MANUAL in '%files'
- test for chkconfig, use only if found

* Sun Dec 22 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.7.0
- fixed typo with _usr macro on ./configure
- stops running samhain before uninstall
- implemented conditionals to allow proper uninstalls/upgrades
- 'BuildPreReq: gpg' is considered only if '--with gpg' is provided
- run 'chkconfig' to activate samhain after installation
- warn user that samhain must be manually started after
  install/upgrade

* Fri Dec 20 2002 Rainer Wichmann <support at la-samhna dot de>
- backported to samhain.spec.in (take over user's choices from configure)
- also save samhain.startLSB and samhain.startSuSE for install-boot 

* Thu Dec 19 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.6.6
- optional parameters '--with gpg' and '--with tests'
- use of pre-defined macros whenever possible

* Wed Dec 18 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.6.6
- Fixed installation process, avoiding hardcoded paths on the binaries
  (thks to samhain's author Rainer Wichmann)

* Mon Dec 16 2002 Andre Oliveira da Costa <brblueser@uol.com.br> 1.6.6
- First attempt to build from sources