source: trunk/deploy.sh.in@ 480

#! /bin/sh

#
# Copyright Rainer Wichmann (2005)
#
# License Information:
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#

#VERSION2.0

# -----------------------------------------------------------------------
# Be Bourne compatible
# -----------------------------------------------------------------------

if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi

# -----------------------------------------------------------------------
# Make sure we support functions (from the autoconf manual)
# -----------------------------------------------------------------------

SHELL="${SHELL-/bin/sh}"
if test x"$1" = "x--re-executed" 
then
    shift
elif "$SHELL" -c 'foo () { (exit 0); exit 0; }; foo' 2>/dev/null
then
    :
else
    for cmd in sh bash ash bsh ksh zsh sh5; do
        X="$PATH:/bin:/usr/bin:/usr/afsws/bin:/usr/ucb";
        OLD_IFS=${IFS}
        IFS=':'; export IFS 
        for dir in $X; do
            shell="$dir/$cmd"
            if (test -f "$shell" || test -f "$shell.exe")
            then
                if "$shell" -c  'foo () { (exit 0); exit 0; }; foo' 2>/dev/null
                then
                    SHELL="$shell"; export SHELL
                    IFS=${OLD_IFS}; export IFS
                    exec "$shell" "$0" --re-executed ${1+"$@"}
                fi
            fi
        done
        IFS=${OLD_IFS}; export IFS
    done
    echo "-----------------------------------------------------------------"
    echo "ERROR: Unable to locate a shell interpreter with function support" >&2
    echo "-----------------------------------------------------------------"
    { (exit 1); exit 1; }
fi

# -----------------------------------------------------------------------
# Test for 'echo -n'
# -----------------------------------------------------------------------

case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,*  ) ECHO_N=-n ECHO_C= ;;
  *)       ECHO_N= ECHO_C='\c' ;;
esac

as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits


#########################################################################
#
# Configuration section
#
#########################################################################

# -----------------------------------------------------------------------
# The following part will be cut and saved to ~/.deploy.conf
# -----------------------------------------------------------------------

#__BEGIN_CUT__

#########################################################################
#
# This file is sourced by a Bourne shell script.
# Thus you need to take care of proper shell syntax.
#
#########################################################################

# if you need, you can expand your PATH environment variable here
# just uncomment and replace /opt/contrib/bin with whatever you need
#
# PATH="/opt/contrib/bin:${PATH}"; export PATH

# the base directory of the deployment system
# CLI option: --basedir=...
#
defbasedir="@mydataroot@/profiles"

# the name of the database of installed clients
# no CLI option
#
defdatabase="yulerc.install.db"

# be quiet; 0 = false, 1 = true, 2 = very quiet
# CLI option: --quiet | --quiet=2
#
silent=0; 

# assume yes as answer to all prompts and run non-interactively
# 0 = false, 1 = true
# CLI option: --yes
#
assumeyes=0; 

# which 'dialog' to use (e.g. "Xdialog")
# "no" for plain text; empty ("") lets the program search for dialog
# CLI option: --dialog=...
#
prefdialog=""

# operating system; no default
# CLI option: --arch=...
#
arch=""

# Format for binary packages (run | deb | rpm | tbz2 | solaris-pkg | depot) 
# CLI option: --format=...
#
format=""
 
# logfile; default is none
# CLI option: --logfile=...
#
logfile=""

# The path to the yule (samhain server) executable.
# CLI option: --yule_exec=...
#
yule_exec="@sbindir@/yule"

# The path to the yule (samhain server) configuration file.
# CLI option: --yule_conf=...
#
yule_conf="@sysconfdir@/yulerc"

# The path to the data directory of yule (samhain server).
# This is the directory where client configuration/database files
# are stored.
# CLI option: --yule_data=...
#
yule_data="@mydataroot@"

# The temporary directory to use. Default is '/tmp', but some
# sites may mount this 'noexec'.
#
temp_dir="/tmp"

#__END_CUT__

# -----------------------------------------------------------------------
# Write configuration file to user home directory/Read configuration file
# -----------------------------------------------------------------------

if test -f ~/.deploy.conf 
then
    . ~/.deploy.conf
else
    #
    # From the autoconf configure script - search ourselves
    #
    case $0 in
        *[\\/]* ) as_myself=$0 ;;
        *) old_IFS=$IFS; IFS=:
        for as_dir in $PATH
        do
            IFS=$old_IFS
            test -z "$as_dir" && as_dir=.
            test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
        done
        ;;
    esac
    # We did not find ourselves, most probably we were run as `sh COMMAND'
    # in which case we are not to be found in the path.
    if test "x$as_myself" = x; then
        as_myself=$0
    fi
    if test ! -f "$as_myself"; then
        { echo "ERROR: cannot find myself; rerun with an absolute path" >&2
    { (exit 1); exit 1; }; }
    fi
    cat "$as_myself" | sed  -n -e '/^#__BEGIN_CUT__/,/^#__END_CUT__/ p ' >~/.deploy.conf && {
        echo
        echo "-----------------------------------------------------"
        echo " Configuration file ~/.deploy.conf created"
        echo " You may want to edit it to adapt it to your needs"
        echo "-----------------------------------------------------"
        echo
        }
fi

export silent
export assumeyes
export arch
export logfile
export format 
export yule_exec
export yule_conf
export yule_data
export temp_dir

# dialog
#
DIALOG="${prefdialog}";
export DIALOG

# base directory
#
basedir="$defbasedir"; 
export basedir

# simulate only; 0 = false, 1 = true
#
simulate=0; 
export simulate

# version
#
version=2.0; 
export version

# host; no default
#
host=
export host

# hostgroup; empty default
#
hostgroup=
export hostgroup


# action; no default
#
action=
export action

# the 'log.lastrun' logfile
#
logOpen=0
export logOpen


# source version; default = current
#
src_version=""
export src_version

# checksrc; do you want to delete if PGP signature check fails ?
#
cs_delete=0
export cs_delete

# build; do you want to pack the executable ?
#
bd_packed=''
export bd_packed

bd_user='root'
export bd_user

# addpath
#
bd_addpath=""
export bd_addpath

# Install; do you want to initialize the database ?
#
is_init=y
export is_init

# Install; do you want to replace the rc.host file ?
#
is_rcfile=y
export is_rcfile

# Install; do you want to start the client ?
#
is_startup=y
export is_startup

# Install; optional local command ?
#
local_command=""; export local_command

# Info on packages ?
#
showpkg=n
export showpkg

#########################################################################
#
# Help Subroutines
#
#########################################################################

# -----------------------------------------------------------------------
# We cannot source these, because we don't know yet the base directory
# -----------------------------------------------------------------------

showUNINSTALL() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] uninstall"
    echo
    echo "Uninstall the samhain client from the specified host. Can only be"
    echo "used if the client has been installed with deploy.sh version 2."
    echo
    echo "Options:"
    echo
    echo " --host=<hostname>      The host where you want to uninstall."
    echo " --tmpdir=<path>        Temporary directory to use on the this host."
    echo
    { (exit 0); exit 0; }
}

showINFO() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] info"
    echo
    echo "Show info for hosts in client database (default), or for available"
    echo "binary installer packages."
    echo
    echo "Options:"
    echo
    echo " --packages             Show info on packages."
    echo
    { (exit 0); exit 0; }
}

showCLEAN() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] clean"
    echo
    echo "Remove all files that are no longer needed:"
    echo "  - Source tarballs in ${basedir}/source"
    echo "  - Unused installer packages in ${basedir}/archpkg"
    echo
    { (exit 0); exit 0; }
}

showCHECKSRC() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] checksrc"
    echo
    echo "Check PGP signatures of source tarballs in the source/ subdirectory"
    echo "of the deploy system."
    echo "You must have gpg (GnuPG) in your PATH, and you should have imported"
    echo "the samhain release PGP key (Key ID 0F571F6C, Rainer Wichmann)."
    echo "To import the key, simply execute the command"
    echo "\"gpg --keyserver blackhole.pca.dfn.de --recv-keys 0F571F6C\""
    echo
    echo "Options:"
    echo
    echo " --delete               Delete source tarballs if PGP signature"
    echo "        cannot be verified."
    echo
    { (exit 0); exit 0; }
}

showDOWNLOAD() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] download"
    echo
    echo "Download a samhain source tarball from http://www.la-samhna.de,"
    echo "check its PGP signature, and install it into the source/ subdirectory"
    echo "of the deploy system."
    echo "You must have gpg (GnuPG) in your PATH, and you should have imported"
    echo "the samhain release PGP key (Key ID 0F571F6C, Rainer Wichmann)."
    echo "To import the key, simply execute the command"
    echo "\"gpg --keyserver blackhole.pca.dfn.de --recv-keys 0F571F6C\""
    echo 
    echo "Options:"
    echo
    echo " --version=<version>    Version of samhain to download. The"
    echo "        default is \"current\" to download the current version."
    echo
    { (exit 0); exit 0; }
}

showBUILD() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] build"
    echo
    echo "Copy a source tarball to a build machine, build a binary package, and fetch"
    echo "the package. Will bail out if not running under ssh-agent. If you are sure"
    echo "that you don't need ssh-agent, set the environment variable SSH_AGENT_PID"
    echo "to some arbitrary string before launching the deploy.sh command."
    echo
    echo "Options:"
    echo
    echo " --host=<hostname>      The build host."
    echo " --arch=<arch>          The architecture/operating system to build for."
    echo "        This is used to get the \"./configure\" options from the file"
    echo "        \${basedir}/configs/\${arch}.configure."
    echo " --version=<version>    The version of samhain you want to build."
    echo " --format=<run|rpm|deb|tbz2|solaris-pkg|depot>"
    echo "        The format of the package. \"run\" is a portable tar"
    echo "        package, \"deb\" is for Debian, \"tbz2\" for Gentoo,"
    echo "        \"rpm\" for any RPM-based Linux, \"solaris-pkg\""
    echo "        for Sun Solaris, and \"depot\" for HP-UX"
    echo " --packed=<password>    The client password, if you want to"
    echo "        create a packed executable. Defaults to empty (don't pack)"
    echo " --user=<username>      Login as <username> to the build host (root)."
    echo " --add-path=<path>      Append 'path' to the PATH variable on the build host."
    echo " --tmpdir=<path>        Temporary directory to use on the build host."
    { (exit 0); exit 0; }
}

showINSTALL() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] install"
    echo
    echo "Copy a pre-built binary installer package to a remote host, stop the client"
    echo "running there (if any), install the (new) client, optionally initialize"
    echo "the file signature database and fetch it from the remote host, update"
    echo "the server configuration file and reload the server."
    echo
    echo "Options:"
    echo
    echo " --host=<FQDN>          The host where you want to install."
    echo " --group=<group>        Optional group the host belongs to."
    echo " --arch=<arch>          The architecture/operating system of this host."
    echo "        This is used to get the correct binary package."
    echo " --version=<version>    The version of samhain you want to install."
    echo " --format=<run|rpm|deb|tbz2|solaris-pkg|depot>"
    echo "        The format of the binary package."
    echo " --yule_exec=<path>     The path to the 'yule' executable."
    echo " --yule_conf=<path>     The path to the 'yule' configuration file."
    echo " --yule_data=<path>     The path to the 'yule' data directory."
    echo " --no-init              Do not initialize the file signature database."
    echo " --no-rcfile            Do not replace the rc.host file on server."
    echo " --no-start             Do not start the client after installation."
    echo " --local=<path>         Local command (executed twice: "
    echo "                        after config installation and before client startup)."
    echo " --tmpdir=<path>        Temporary directory to use on the this host."
    { (exit 0); exit 0; }
}

showUSAGE() {
    echo "deploy.sh $version"
    echo "USAGE: deploy.sh [options] command"
    echo 
    echo "Commands: info | clean | download | checksrc | build | install | uninstall"
    echo
    echo "Options:"
    echo " -h | --help            Print general usage information."
    echo " -h | --help <command>  Print usage information for \"command\"."
    echo " --basedir=<directory>  Set the basedir for the deployment system."
    echo "                        The default is ${defbasedir}."
    echo " -q | --quiet           Produce output suitable for logging." 
    echo "        You can also use -q=# to set the quiet level up to" 
    echo "        a maximum of 2. Note that -q=2 implies --yes (see below)."
    echo " -s | --simulate        Perform  a  simulation  of events that"
    echo "        would occur but do not actually change the  system."
    echo " -y | --yes             Assume "yes" as answer to"
    echo "        all prompts and run non-interactively."
    echo " -o <file> | --logfile=<file>"
    echo "        Specify an output file for messages that would go to stdout"
    echo "        otherwise. Has no effect on stderr (error messages)."
    echo " -d <dialog> | --dialog=<dialog>  Specify your preferred \"dialog\""
    echo "        clone (e.g. Xdialog). Use \"no\" to force plain text."
    if test x"$1" = x
    then
        { (exit 0); exit 0; }
    else
        { (exit $1); exit $1; }
    fi
}

#########################################################################
#
# Command line
#
#########################################################################

for option
do

  # If the previous option needs an argument, assign it.
  #
  if test -n "$opt_prev"; then
    eval "$opt_prev=\$option"
    eval export "$opt_prev"
    opt_prev=
    continue
  fi

  case "$option" in
  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) optarg= ;;
  esac

  case "$option" in

  # Info

  --packages | -packages)
    showpkg=y; export showpkg;
    ;;

  # Install

  --yule_exec | -yule_exec | --yule-exec | -yule-exec)
    opt_prev=yule_exec
    ;;

  --yule_exec=* | -yule_exec=* | --yule-exec=* | -yule-exec=*)
    yule_exec="$optarg"; export yule_exec
    ;;

  --yule_conf | -yule_conf | --yule-conf | -yule-conf)
    opt_prev=yule_conf
    ;;

  --yule_conf=* | -yule_conf=* | --yule-conf=* | -yule-conf=*)
    yule_conf="$optarg"; export yule_conf
    ;;

  --yule_data | -yule_data | --yule-data | -yule-data)
    opt_prev=yule_data
    ;;

  --yule_data=* | -yule_data=* | --yule-data=* | -yule-data=*)
    yule_data="$optarg"; export yule_data
    ;;

  --no-init | -no-init)
    is_init=n; export is_init
    ;;

  --no-rcfile | -no-rcfile)
    is_rcfile=n; export is_rcfile
    ;;

  --no-start | -no-start)
    is_startup=n; export is_startup
    ;;

  --local | -local)
    opt_prev=local_command
    ;;

  --local=* | -local=*)
    local_command="$optarg"; export local_command
    ;;

  --group | -group)
    opt_prev=hostgroup
    ;;

  --group=* | -group=*)
    hostgroup="$optarg"; export hostgroup
    ;;

  # Build

  --format | -format)
    opt_prev=format
    ;;

  --format=* | -format=*)
    format="$optarg"; export format
    ;;

  --packed | --pack | -packed | -pack)
    opt_prev=bd_packed
    ;;

  --packed=* | -packed=*)
    bd_packed="$optarg"; export bd_packed
    ;;

  --user | -user)
    opt_prev=bd_user
    ;;

  --user=* | -user=*)
    bd_user="$optarg"; export bd_user
    ;;

  --add-path | -add-path | --addpath | -addpath)
    opt_prev=bd_addpath
    ;;

  --add-path=* | -add-path=* | --addpath=* | -addpath=*)
    bd_addpath="$optarg"; export bd_addpath
    ;;

  # Checksource

  --delete | -delete)
    cs_delete=1; export cs_delete
    ;;

  # Download

  --version | -version)
    opt_prev=src_version
    ;;
  --version=* | -version=*)
    src_version="$optarg"; export src_version
    ;;

  # Generic

  --basedir | -basedir)
    opt_prev=basedir
    ;;
  --basedir=* | -basedir=*)
    basedir="$optarg"; export basedir
    ;;

  --host | -host)
    opt_prev=host
    ;;
  --host=* | -host=*)
    host="$optarg"; export host
    ;;

  --arch | -arch)
    opt_prev=arch
    ;;
  --arch=* | -arch=*)
    arch="$optarg"; export arch
    ;;

  --tmpdir | -tmpdir)
    opt_prev=temp_dir
    ;;
  --tmpdir=* | -tmpdir=*)
    temp_dir="$optarg"; export temp_dir
    ;;

  -o | --logfile | -logfile)
    opt_prev=logfile
    ;;
  -o=* | --logfile=* | -logfile=*)
    logfile="$optarg"; export logfile
    ;;

  -h | --h | --help | -help | help)
    if test $# -gt 1
    then
        if test x"$2" = xdownload
        then
            showDOWNLOAD
        elif test x"$2" = xinfo
        then
            showINFO
        elif test x"$2" = xchecksrc
        then
            showCHECKSRC
        elif test x"$2" = xclean
        then
            showCLEAN
        elif test x"$2" = xbuild
        then
            showBUILD
        elif test x"$2" = xinstall
        then
            showINSTALL
        elif test x"$2" = xuninstall
        then
            showUNINSTALL
        else
            showUSAGE 1
        fi
    fi
    showUSAGE
    ;;

  -q | --quiet | -quiet | --silent | -silent)
    if test x"$silent" = x0
    then
        silent=1; export silent
    else
        silent=2; export silent
    fi
    ;;
  -q=* | --quiet=* | --silent=* | -silent=*)
    silent="$optarg"; export silent
    ;;

  -s | --simulate | -simulate | --dry-run | -dry-run | --recon | -recon | --just-print | -just-print | --no-act | -no-act)
    simulate=1; export simulate
    ;;

  -y | --yes | -yes)
    assumeyes=1; export assumeyes
    ;;

  -d | --dialog | -dialog)
    opt_prev=DIALOG
    ;;
  -d=* | --dialog=* | -dialog=*)
    DIALOG="$optarg"; export DIALOG
    ;;

  -*)
    showUSAGE 1
    ;;

  clean | download | checksrc | build | install | info | uninstall)
    action="$option"; export action
    break ;;
  esac

done

#########################################################################
#
# Subroutines
#
#########################################################################

# -----------------------------------------------------------------------
# Printing/logging Subroutines
# -----------------------------------------------------------------------
. ${basedir}/libexec/funcPRINT

# -----------------------------------------------------------------------
# Interaction Subroutines
# -----------------------------------------------------------------------
. ${basedir}/libexec/funcDIALOG

# -----------------------------------------------------------------------
# Setup test Subroutines
# -----------------------------------------------------------------------
. ${basedir}/libexec/funcSETUP

# -----------------------------------------------------------------------
# Subroutines for determining existence of / path to executables
# -----------------------------------------------------------------------
. ${basedir}/libexec/funcEXE

# -----------------------------------------------------------------------
# Subroutines for building
# -----------------------------------------------------------------------
. ${basedir}/libexec/funcBUILD

# -----------------------------------------------------------------------
# Subroutines for installing
# -----------------------------------------------------------------------
. ${basedir}/libexec/funcINSTALL

# -----------------------------------------------------------------------
# Subroutines for client database
# -----------------------------------------------------------------------
. ${basedir}/libexec/funcDB

# -----------------------------------------------------------------------
# Subroutine for the 'download' command
# -----------------------------------------------------------------------
. ${basedir}/libexec/comDOWNLOAD

# -----------------------------------------------------------------------
# Subroutine for the 'checksrc' command
# -----------------------------------------------------------------------
. ${basedir}/libexec/comCHECKSRC

# -----------------------------------------------------------------------
# Subroutine for the 'clean' command
# -----------------------------------------------------------------------
. ${basedir}/libexec/comCLEAN

# -----------------------------------------------------------------------
# Subroutine for the 'build' command
# -----------------------------------------------------------------------
. ${basedir}/libexec/comBUILD

# -----------------------------------------------------------------------
# Subroutine for the 'install' command
# -----------------------------------------------------------------------
. ${basedir}/libexec/comINSTALL

# -----------------------------------------------------------------------
# Subroutine for the 'install' command
# -----------------------------------------------------------------------
. ${basedir}/libexec/comUNINSTALL


#########################################################################
#
# Main
#
#########################################################################

main_exit_status=0

tmpdir=

# Find a dialog clone
#
findDIALOG

# Check for basedir and tmpdir
#
testSETUP1

# Logfile setup
#
exec 5>${basedir}/tmp/logfile.lastrun
now=`date`
echo "$now: $0 " ${1+"$@"} >&5 
lastlog="${basedir}/tmp/logfile.lastrun"; export lastlog
logOpen=1

# Temporary directory/file setup
#
tmpD="$tmpdir/build.gui.$$"
mkdir "$tmpD" || printFATAL "Cannot create temporary directory $tmpD"
export tmpD
tmpF="$tmpD/tmpF.$$"
touch $tmpF || printFATAL "Cannot create temporary file $tmpF"
export tmpF
tmpERR="$tmpD/tmpERR.$$"
echo '0' > $tmpERR || printFATAL "Cannot create temporary file $tmpERR"
export tmpERR

# Trap exit and cleanup
#
trap "exit_status=$?; rm -rf $tmpD; exit ${exit_status};" 0
trap "(exit 1); exit 1;" 1 2 13 15

# Check for action to perform, and host, if required
#
testSETUP2

if test x"$action" = xdownload
then
    if test x"$src_version" = x
    then
        src_version="current"; export src_version
    fi
    #---------------------------------------------------------------------
    # Vodoo code to tee both stdout and stderr, but keep them seperate.
    #---------------------------------------------------------------------
    if test x"$DIALOG" = x
    then
        ((commandDOWNLOAD | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
    else
        commandDOWNLOAD 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version DOWNLOAD logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
    fi
elif test x"$action" = xinfo
then
    if test x"${showpkg}" = xn
    then
      if test x"$DIALOG" = x
      then
        ((dbSHOWHOSTS "${host}" | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
      else
        dbSHOWHOSTS "${host}" 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version INFO logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
      fi
    else
      if test x"$DIALOG" = x
      then
        ((dbSHOWPKG show | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
      else
        dbSHOWPKG show 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version INFO logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
      fi
    fi
elif test x"$action" = xchecksrc
then
    if test x"$DIALOG" = x
    then
        ((commandCHECKSRC | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
    else
        commandCHECKSRC 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version CHECKSRC logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
    fi
elif test x"$action" = xclean
then
    if test x"$DIALOG" = x
    then
        ((commandCLEAN | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
    else
        commandCLEAN 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version CLEAN logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
    fi
elif test x"$action" = xbuild
then

    #---------------------------------------------------------------------
    # Make sure we are running under ssh-agent.
    #---------------------------------------------------------------------
    if test x"$SSH_AGENT_PID" = x
    then
        if test x"$assumeyes" = x1
        then
            printFATAL "Not running under ssh-agent, and not running interactive: cannot continue."
        else
            promptYESNO "Not running under ssh-agent, continue anyway" "no"
            test "x$YESNO" = xn && { (exit 0; ); exit 0; }
        fi
    fi

    #---------------------------------------------------------------------
    # Setup.
    #---------------------------------------------------------------------
    selBVERSION
    selBARCH
    selBFORMAT

    if test x"$DIALOG" = x
    then
        ((commandBUILD | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
    else
        commandBUILD 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version BUILD logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
    fi

elif test x"$action" = xinstall
then

    needEXE ssh scp ssh-agent

    #---------------------------------------------------------------------
    # Make sure we are running under ssh-agent.
    #---------------------------------------------------------------------
    if test x"$SSH_AGENT_PID" = x
    then
        if test x"$assumeyes" = x1
        then
            printFATAL "Not running under ssh-agent, and not running interactive: cannot continue."
        else
            promptYESNO "Not running under ssh-agent, continue anyway" "no"
            test "x$YESNO" = xn && { (exit 0; ); exit 0; }
        fi
    fi

    #---------------------------------------------------------------------
    # Setup.
    #---------------------------------------------------------------------
    is_root=`id -u 2>/dev/null`
    if test "x$?" = x0 && test "x${is_root}" != x0
    then
        promptYESNO "You are not root, continue anyway" "no"
        test "x$YESNO" = xn && { (exit 0; ); exit 0; }
    else
        is_root=0
    fi
    pathYULE
    pathYDATA
    selbinARCH
    selbinVERSION
    if test "x${is_init}" = xy
    then
        promptYESNO "Initialize database" "yes"
        is_init=$YESNO
    fi
    if test "x${is_rcfile}" = xy
    then
        promptYESNO "Replace rc.host file on server" "yes"
        is_rcfile=$YESNO
    fi
    if test "x${is_startup}" = xy
    then
        promptYESNO "Start client after installation" "yes"
        is_startup=$YESNO
    fi
    if test -f "${yule_conf}"
    then
        :
    else
        promptINPUT "Please enter the path to the yule configuration file"
        yule_conf="$INPUT"; export yule_conf
        if test -f "${yule_conf}"
        then
            :
        else
            printFATAL "Cannot find ${yule_conf}"
        fi
    fi

    if test x"$DIALOG" = x
    then
        ((commandINSTALL | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
    else
        commandINSTALL 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version INSTALL logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
    fi

elif test x"$action" = xuninstall
then

    needEXE ssh scp ssh-agent

    #---------------------------------------------------------------------
    # Make sure we are running under ssh-agent.
    #---------------------------------------------------------------------
    if test x"$SSH_AGENT_PID" = x
    then
        if test x"$assumeyes" = x1
        then
            printFATAL "Not running under ssh-agent, and not running interactive: cannot continue."
        else
            promptYESNO "Not running under ssh-agent, continue anyway" "no"
            test "x$YESNO" = xn && { (exit 0; ); exit 0; }
        fi
    fi

    #---------------------------------------------------------------------
    # Setup.
    #---------------------------------------------------------------------

    dbINFO "$host"

    if test x"$?" = x0
    then
        if test x"${DB_status}" = "xD2_installed"
        then
            :
        else
            if test x"${DB_status}" = "xD2_removed"
            then
                promptYESNO "Already uninstalled on host $host, continue" "no"
                test "x$YESNO" = xn && { (exit 0; ); exit 0; }
            else
                printFATAL "No deploy version 2 installation on host $host: ${DB_status}"
            fi
        fi
    else
        printFATAL "Cannot uninstall on host $host"
    fi

    if test x"$DIALOG" = x
    then
        ((commandUNINSTALL | tee -a "$lastlog") 6>&1 1>&2 2>&6 | \
        tee -a "$lastlog") 6>&1 1>&2 2>&6
    else
        commandUNINSTALL 2>&1 | tee -a "$lastlog" >/dev/null | $DIALOG \
        --title "deploy.sh $version UNINSTALL logfile" \
        --backtitle "Logfile:  $lastlog" \
        --tailbox "$lastlog" 19 75
    fi

fi

if test x"${main_exit_status}" = x0
then
    test -f "$tmpERR" && main_exit_status=`cat "$tmpERR" | tr -d '\n'`
fi

(exit ${main_exit_status}); exit ${main_exit_status};