dnl aclocal.m4 generated automatically by aclocal 1.3 dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. dnl This Makefile.in is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. # # Check to make sure that the build environment is sane. # AC_DEFUN([AM_INIT_AUTOMAKE], [ AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE") AC_DEFINE_UNQUOTED(VERSION, "$VERSION")) AC_REQUIRE([AC_PROG_MAKE_SET])]) # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi]) AC_DEFUN([sh_run_prog], [if test "$cross_compiling" = "yes"; then AC_MSG_ERROR([Can not probe non-portable values when cross compiling]) fi cat > conftest.$ac_ext </dev/null)` then dnl Don't remove the temporary files here, so they can be examined. ifelse([$3], , :, [$3]) else echo "configure: failed program was:" >&AC_FD_CC cat conftest.$ac_ext >&AC_FD_CC ifelse([$4], , , [ rm -fr conftest* $4 ]) fi rm -fr conftest* ]) dnl fs type number of the proc filing system AC_DEFUN([sh_procfs_id], [AC_MSG_CHECKING([f_type of /proc]) AC_CACHE_VAL([sh_cv_proc_fstype], [sh_run_prog( changequote(<<, >>)dnl <<#include #ifdef HAVE_STDLIB_H #include #endif /* HAVE_STDLIB_H */ #ifdef HAVE_UNISTD_H #include #endif /* HAVE_UNISTD_H */ #ifdef HAVE_SYS_VFS_H #include #endif #ifndef Q #define __Q(x) #x #define Q(x) __Q(x) #endif int main(void) { struct statfs fsbuf; long ft; if (statfs("/", &fsbuf)!=0) exit(1); ft=fsbuf.f_type; if (statfs("/proc/1", &fsbuf)!=0) exit(1); if (ft!=fsbuf.f_type) printf("0x%08lx", fsbuf.f_type); else puts("statfs useless"); exit(0); } >> changequote([, ]), sh_cv_proc_fstype,, sh_cv_proc_fstype="a fatal error occured")]) AC_MSG_RESULT($sh_cv_proc_fstype) if test "${sh_cv_proc_fstype}" = "a fatal error occured"; then $1=$2 $4 else if test "${sh_cv_proc_fstype}" = "statfs useless"; then $1=$2 $4 else $1=$sh_cv_proc_fstype $3 fi; fi ]) # Check whether mlock is broken (hpux 10.20 raises a SIGBUS if mlock # is not called from uid 0 (not tested whether uid 0 works) dnl AC_CHECK_MLOCK dnl define([AC_CHECK_MLOCK], [ AC_CHECK_FUNCS(mlock) if test "$ac_cv_func_mlock" = "yes"; then AC_MSG_CHECKING(whether mlock is broken) AC_CACHE_VAL(ac_cv_have_broken_mlock, AC_TRY_RUN([ #include #include #include #include #include #include int main() { char *pool; int err; long int pgsize = getpagesize(); pool = malloc( 4096 + pgsize ); if( !pool ) return 2; pool += (pgsize - ((long int)pool % pgsize)); err = mlock( pool, 4096 ); if( !err || errno == EPERM ) return 0; /* okay */ return 1; /* hmmm */ } ], ac_cv_have_broken_mlock="no", ac_cv_have_broken_mlock="yes", ac_cv_have_broken_mlock="assume-no" ) ) if test "$ac_cv_have_broken_mlock" = "yes"; then AC_DEFINE(HAVE_BROKEN_MLOCK) AC_MSG_RESULT(yes) else if test "$ac_cv_have_broken_mlock" = "no"; then AC_MSG_RESULT(no) else AC_MSG_RESULT(assuming no) fi fi fi ]) dnl @synopsis AC_FUNC_VSNPRINTF dnl dnl Check whether there is a reasonably sane vsnprintf() function installed. dnl "Reasonably sane" in this context means never clobbering memory beyond dnl the buffer supplied, and having a sensible return value. It is dnl explicitly allowed not to NUL-terminate the return value, however. dnl dnl @version $Id: ac_func_vsnprintf.m4,v 1.1 2001/07/26 02:00:21 guidod Exp $ dnl @author Gaute Strokkenes dnl AC_DEFUN([SL_CHECK_VSNPRINTF], [AC_CACHE_CHECK(for working vsnprintf, ac_cv_func_vsnprintf, [AC_TRY_RUN( [#include #include int doit(char * s, ...) { char buffer[32]; va_list args; int r; buffer[5] = 'X'; va_start(args, s); r = vsnprintf(buffer, 5, s, args); va_end(args); /* -1 is pre-C99, 7 is C99. R.W. 17.01.2003 disallow -1 */ if (r != 7) exit(1); /* We deliberately do not care if the result is NUL-terminated or not, since this is easy to work around like this. */ buffer[4] = 0; /* Simple sanity check. */ if (strcmp(buffer, "1234")) exit(1); if (buffer[5] != 'X') exit(1); exit(0); } int main(void) { doit("1234567"); exit(1); }], ac_cv_func_vsnprintf=yes, ac_cv_func_vsnprintf=no, ac_cv_func_vsnprintf=no)]) dnl Note that the default is to be pessimistic in the case dnl of cross compilation. dnl If you know that the target has a sensible vsnprintf(), dnl you can get around this dnl by setting ac_func_vsnprintf to yes, as described in the Autoconf manual. if test $ac_cv_func_vsnprintf = yes; then : else AC_DEFINE(HAVE_BROKEN_VSNPRINTF, 1, [Define if you have a broken version of the `vsnprintf' function.]) fi ])# AC_FUNC_VSNPRINTF dnl SH_CHECK_TYPEDEF(TYPE, HAVE_NAME) dnl Check whether a typedef exists and create a #define $2 if it exists dnl AC_DEFUN([SH_CHECK_TYPEDEF], [ AC_MSG_CHECKING(for $1 typedef) sh_cv_typedef_foo=`echo sh_cv_typedef_$1 | sed -e 's% %_%g'` AC_CACHE_VAL( $sh_cv_typedef_foo, [AC_TRY_COMPILE([ #include #include #ifdef HAVE_STDINT_H #include #endif #ifdef HAVE_INTTYPES_H #include #endif], [ #undef $1 int a = sizeof($1); ], sh_cv_typedef=yes, sh_cv_typedef=no )]) AC_MSG_RESULT($sh_cv_typedef) if test "$sh_cv_typedef" = yes; then AC_DEFINE($2) sh_$2=yes else sh_$2=no fi ]) dnl ********************** dnl *** va_copy checks *** dnl ********************** AC_DEFUN([SL_CHECK_VA_COPY], [AC_MSG_CHECKING(for va_copy()) AC_CACHE_VAL(sh_cv_va_copy,[ AC_TRY_RUN([ #include void f (int i, ...) { va_list args1, args2; va_start (args1, i); va_copy (args2, args1); if (va_arg (args2, int) != 42) exit (1); if (va_arg (args1, int) != 42) exit (1); va_end (args1); va_end (args2); } int main() { f (0, 42); return 0; }], sh_cv_va_copy=yes , sh_cv_va_copy=no , sh_cv_va_copy=no) ]) AC_MSG_RESULT($sh_cv_va_copy) AC_MSG_CHECKING(for __va_copy()) AC_CACHE_VAL(sh_cv___va_copy,[ AC_TRY_RUN([ #include void f (int i, ...) { va_list args1, args2; va_start (args1, i); __va_copy (args2, args1); if (va_arg (args2, int) != 42) exit (1); if (va_arg (args1, int) != 42) exit (1); va_end (args1); va_end (args2); } int main() { f (0, 42); return 0; }], sh_cv___va_copy=yes , sh_cv___va_copy=no , sh_cv___va_copy=no) ]) AC_MSG_RESULT($sh_cv___va_copy) AC_MSG_CHECKING(whether va_lists can be copied by value) AC_CACHE_VAL(sh_cv_va_val_copy,[ AC_TRY_RUN([ #include void f (int i, ...) { va_list args1, args2; va_start (args1, i); args2 = args1; if (va_arg (args2, int) != 42) exit (1); if (va_arg (args1, int) != 42) exit (1); va_end (args1); va_end (args2); } int main() { f (0, 42); return 0; }], sh_cv_va_val_copy=yes , sh_cv_va_val_copy=no , sh_cv_va_val_copy=no) ]) if test "x$sh_cv_va_copy" = "xyes"; then AC_DEFINE(VA_COPY, va_copy) else if test "x$sh_cv___va_copy" = "xyes"; then AC_DEFINE(VA_COPY, __va_copy) fi fi if test "x$sh_cv_va_val_copy" = "xno"; then AC_DEFINE(VA_COPY_AS_ARRAY) fi AC_MSG_RESULT($sh_cv_va_val_copy) ]) dnl SH_INIT_PARSE_ARGS() m4_define([SH_INIT_PARSE_ARGS], [ m4_divert_push([PARSE_ARGS])dnl as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # Sed expression to map a string onto a valid CPP name. as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[[^_$as_cr_alnum]]%_%g" as_tr_sh="eval sed 'y%*+%pp%;s%[[^_$as_cr_alnum]]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null AC_SUBST(exec_prefix, NONE)dnl no_create= no_recursion= AC_SUBST(prefix, NONE)dnl program_prefix=NONE program_suffix=NONE AC_SUBST(program_transform_name, [s,x,x,])dnl silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE DESTDIR= SH_ENABLE_OPTS="db-reload xml-log message-queue login-watch process-check port-check mounts-check logfile-monitor userfiles debug ptrace static network udp nocl stealth micro-stealth install-name identity khide suidcheck base largefile mail external-scripts encrypt srp dnmalloc" SH_WITH_OPTS="prelude libprelude-prefix database libwrap cflags libs console altconsole timeserver alttimeserver rnd egd-socket port logserver altlogserver kcheck gpg keyid checksum fp recipient sender trusted tmp-dir config-file log-file pid-file state-dir data-file html-file" # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. dnl Use braces instead of parens because sh, perl, etc. also accept them. sbindir='${exec_prefix}/sbin' sysconfdir='${prefix}/etc' localstatedir='${prefix}/var' mandir='${prefix}/share/man' AC_SUBST([sbindir], ['${exec_prefix}/sbin'])dnl AC_SUBST([sysconfdir], ['${prefix}/etc'])dnl AC_SUBST([localstatedir], ['${prefix}/var'])dnl AC_SUBST([mandir], ['${prefix}/share/man'])dnl # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in changequote(, )dnl *=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; changequote([, ])dnl *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; --config-cache | -C) cache_file=config.cache ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : "[.*[^-_$as_cr_alnum]]" >/dev/null && AC_MSG_ERROR([invalid feature name: $ac_feature]) ac_feature=`echo $ac_feature | sed 's/-/_/g'` ac_enable_check_opt=no for f in ${SH_ENABLE_OPTS} do f=`echo $f | sed 's/-/_/g'` if test x${f} = x"${ac_feature}" then ac_enable_check_opt=yes fi done if test x${ac_enable_check_opt} = xno then AC_MSG_ERROR([unrecognized option: $ac_option Try `$[0] --help' for more information.]) fi eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([[^=]]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : "[.*[^-_$as_cr_alnum]]" >/dev/null && AC_MSG_ERROR([invalid feature name: $ac_feature]) ac_feature=`echo $ac_feature | sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac ac_enable_check_opt=no for f in ${SH_ENABLE_OPTS} do f=`echo $f | sed 's/-/_/g'` if test x${f} = x"${ac_feature}" then ac_enable_check_opt=yes fi done if test x${ac_enable_check_opt} = xno then AC_MSG_ERROR([unrecognized option: $ac_option Try `$[0] --help' for more information.]) fi eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ac_exec_prefix_set="yes" ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ac_exec_prefix_set="yes" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ac_localstatedir_set="yes" ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ac_localstatedir_set="yes" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ac_mandir_set="yes" ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ac_mandir_set="yes" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ac_prefix_set="yes" ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ac_prefix_set="yes" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ac_sbindir_set="yes" ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ac_sbindir_set="yes" ;; -bindir | --bindir | --bindi | --bind | --bin | --bi | --b) echo "WARNING: bindir will be ignored, use sbindir" ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* \ | --bi=* | --b=*) echo "WARNING: bindir will be ignored, use sbindir" ;; -datadir | --datadir) echo "WARNING: datadir will be ignored" ;; -datadir=* | --datadir=*) echo "WARNING: datadir will be ignored" ;; -includedir | --includedir) echo "WARNING: includedir will be ignored" ;; -includedir=* | --includedir=*) echo "WARNING: includedir will be ignored" ;; -infodir | --infodir) echo "WARNING: infodir will be ignored" ;; -infodir=* | --infodir=*) echo "WARNING: infodir will be ignored" ;; -libdir | --libdir) echo "WARNING: libdir will be ignored" ;; -libdir=* | --libdir=*) echo "WARNING: libdir will be ignored" ;; -libexecdir | --libexecdir) echo "WARNING: libexecdir will be ignored" ;; -libexecdir=* | --libexecdir=*) echo "WARNING: libexecdir will be ignored" ;; -sharedstatedir | --sharedstatedir) echo "WARNING: sharedstatedir will be ignored" ;; -sharedstatedir=* | --sharedstatedir=*) echo "WARNING: sharedstatedir will be ignored" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ac_sysconfdir_set="yes" ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ac_sysconfdir_set="yes" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([[^=]]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : "[.*[^-_$as_cr_alnum]]" >/dev/null && AC_MSG_ERROR([invalid package name: $ac_package]) ac_package=`echo $ac_package| sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac ac_with_check_opt=no for f in ${SH_WITH_OPTS} do f=`echo $f | sed 's/-/_/g'` if test x${f} = x"${ac_package}" then ac_with_check_opt=yes fi done if test x${ac_with_check_opt} = xno then AC_MSG_ERROR([unrecognized option: $ac_option Try `$[0] --help' for more information.]) fi eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : "[.*[^-_$as_cr_alnum]]" >/dev/null && AC_MSG_ERROR([invalid package name: $ac_package]) ac_package=`echo $ac_package | sed 's/-/_/g'` ac_with_check_opt=no for f in ${SH_WITH_OPTS} do f=`echo $f | sed 's/-/_/g'` if test x${f} = x"${ac_package}" then ac_with_check_opt=yes fi done if test x${ac_with_check_opt} = xno then AC_MSG_ERROR([unrecognized option: $ac_option Try `$[0] --help' for more information.]) fi eval "with_$ac_package=no" ;; -*) AC_MSG_ERROR([unrecognized option: $ac_option Try `$[0] --help' for more information.]) ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([[^=]]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : "[.*[^_$as_cr_alnum]]" >/dev/null && AC_MSG_ERROR([invalid variable name: $ac_envvar]) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` eval "$ac_envvar='$ac_optarg'" export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. AC_MSG_WARN([you should use --build, --host, --target]) expr "x$ac_option" : "[.*[^-._$as_cr_alnum]]" >/dev/null && AC_MSG_WARN([invalid host type: $ac_option]) : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then AC_MSG_ERROR(missing argument to --`echo $ac_prev | sed 's/_/-/g'`) fi # Be sure to have absolute paths. for ac_var in prefix exec_prefix do eval ac_val=$`echo $ac_var` case $ac_val in [[\\/$]]* | ?:[[\\/]]* | NONE | '' | OPT | USR ) ;; *) AC_MSG_ERROR([expected an absolute directory name for --$ac_var: $ac_val]);; esac done # Be sure to have absolute paths. for ac_var in sbindir sysconfdir localstatedir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [[\\/$]]* | ?:[[\\/]]* ) ;; *) AC_MSG_ERROR([expected an absolute directory name for --$ac_var: $ac_val]);; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe AC_MSG_WARN([If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used.]) elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec AS_MESSAGE_FD>/dev/null m4_divert_pop([PARSE_ARGS])dnl ])# SH_INIT_PARSE_ARGS m4_define([SH_INIT_HELP], [m4_divert_push([HELP_BEGIN])dnl # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures m4_ifset([AC_PACKAGE_STRING], [AC_PACKAGE_STRING], [this package]) to adapt to many kinds of systems. Usage: $[0] [[OPTION]]... [[VAR=VALUE]]... [To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install binaries in \`/usr/local/sbin', the config file in \`/etc', manpage in \`/usr/local/share/man', and state data in \`/var/lib/INSTALL_NAME' (FSH layout). You can specify other FSH compliant layouts with \`--prefix=OPT' or \`--prefix=USR', or you can specify a directory with \`--prefix=DIR' to install in \`DIR/sbin', \`DIR/etc', etc. For better control, use the options below. Fine tuning of the installation directories: --sbindir=DIR system admin executables [EPREFIX/sbin] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --mandir=DIR man documentation [PREFIX/man] For even finer tuning, paths can be specified for individual files (see below) _ACEOF cat <<\_ACEOF] m4_divert_pop([HELP_BEGIN])dnl dnl The order of the diversions here is dnl - HELP_BEGIN dnl which may be prolongated by extra generic options such as with X or dnl AC_ARG_PROGRAM. Displayed only in long --help. dnl dnl - HELP_CANON dnl Support for cross compilation (--build, --host and --target). dnl Display only in long --help. dnl dnl - HELP_ENABLE dnl which starts with the trailer of the HELP_BEGIN, HELP_CANON section, dnl then implements the header of the non generic options. dnl dnl - HELP_WITH dnl dnl - HELP_VAR dnl dnl - HELP_VAR_END dnl dnl - HELP_END dnl initialized below, in which we dump the trailer (handling of the dnl recursion for instance). m4_divert_push([HELP_ENABLE])dnl _ACEOF fi if test -n "$ac_init_help"; then m4_ifset([AC_PACKAGE_STRING], [ case $ac_init_help in short | recursive ) echo "Configuration of AC_PACKAGE_STRING:";; esac]) cat <<\_ACEOF m4_divert_pop([HELP_ENABLE])dnl m4_divert_push([HELP_END])dnl m4_ifset([AC_PACKAGE_BUGREPORT], [ Report bugs to .]) _ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d $ac_dir || continue _AC_SRCPATHS(["$ac_dir"]) cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. if test -f $ac_srcdir/configure.gnu; then echo $SHELL $ac_srcdir/configure.gnu --help=recursive elif test -f $ac_srcdir/configure; then echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || test -f $ac_srcdir/configure.in; then echo $ac_configure --help else AC_MSG_WARN([no configuration information is in $ac_dir]) fi cd $ac_popdir done fi test -n "$ac_init_help" && exit 0 m4_divert_pop([HELP_END])dnl ])# SH_INIT_HELP # Check whether sa_sigaction works. # Rainer Wichmann , 2003. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License. # serial 1 AC_DEFUN([AM_SA_SIGACTION_WORKS], [ am_cv_val_SA_SIGACTION=no AC_CHECK_HEADER(signal.h, [ AM_SI_USER AM_SA_SIGINFO if test $am_cv_val_SI_USER = yes && test $am_cv_val_SA_SIGINFO = yes then AC_TRY_RUN([ #include #include #include #include volatile int xnum = 0; volatile int xcode = 0; jmp_buf Buf; int xsig = SIGSEGV; void sighandler (int xsignam, siginfo_t * xsiginfo, void * xsigadd) { static sigset_t x; if (xsiginfo == NULL) exit(__LINE__); if (xsiginfo->si_signo != xsignam) exit(__LINE__); ++xnum; xcode = xsiginfo->si_code; sigemptyset (&x); sigprocmask(SIG_SETMASK, &x, NULL); longjmp ( Buf, 1); } int main () { struct sigaction newact; newact.sa_sigaction = sighandler; sigemptyset (&newact.sa_mask); newact.sa_flags = SA_SIGINFO; if (0 != sigaction (xsig, &newact, NULL)) exit (__LINE__); if(setjmp ( Buf)) { if (xnum > 1) goto Third; goto Second; } memcpy((void *) 0x0, "test", 5); Second: if (xcode == SI_USER) exit (__LINE__); raise(xsig); Third: if (xcode != SI_USER) exit (__LINE__); if (xnum != 2) exit (__LINE__); return (0); }], am_cv_val_SA_SIGACTION=yes, am_cv_val_SA_SIGACTION=no, am_cv_val_SA_SIGACTION=no) fi ]) AC_MSG_CHECKING([whether sa_sigaction is supported]) if test $am_cv_val_SA_SIGACTION = yes then AC_MSG_RESULT(yes) AC_DEFINE([SA_SIGACTION_WORKS], 1, [Define if sa_sigaction works]) else AC_MSG_RESULT(no) fi ]) # Check whether SI_USER is available in . # Rainer Wichmann , 2003. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License. # serial 1 AC_DEFUN([AM_SI_USER], [if test $ac_cv_header_signal_h = yes; then AC_CACHE_CHECK([for SI_USER in signal.h], am_cv_val_SI_USER, [AC_TRY_LINK([#include ], [return SI_USER], am_cv_val_SI_USER=yes, am_cv_val_SI_USER=no)]) if test $am_cv_val_SI_USER = yes; then AC_DEFINE([HAVE_SI_USER], 1, [Define if you have SI_USER]) fi fi]) # Check whether SA_SIGINFO is available in . # Rainer Wichmann , 2003. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License. # serial 1 AC_DEFUN([AM_SA_SIGINFO], [if test $ac_cv_header_signal_h = yes; then AC_CACHE_CHECK([for SA_SIGINFO in signal.h], am_cv_val_SA_SIGINFO, [AC_TRY_LINK([#include ], [return SA_SIGINFO], am_cv_val_SA_SIGINFO=yes, am_cv_val_SA_SIGINFO=no)]) if test $am_cv_val_SA_SIGINFO = yes; then AC_DEFINE([HAVE_SA_SIGINFO], 1, [Define if you have SA_SIGINFO]) fi fi]) dnl dnl Useful macros for autoconf to check for ssp-patched gcc dnl 1.0 - September 2003 - Tiago Sousa dnl 1.1 - August 2006 - Ted Percival dnl * Stricter language checking (C or C++) dnl * Adds GCC_STACK_PROTECT_LIB to add -lssp to LDFLAGS as necessary dnl * Caches all results dnl * Uses macros to ensure correct ouput in quiet/silent mode dnl 1.2 - April 2007 - Ted Percival dnl * Added GCC_STACK_PROTECTOR macro for simpler (one-line) invocation dnl * GCC_STACK_PROTECT_LIB now adds -lssp to LIBS rather than LDFLAGS dnl dnl About ssp: dnl GCC extension for protecting applications from stack-smashing attacks dnl http://www.research.ibm.com/trl/projects/security/ssp/ dnl dnl Usage: dnl Most people will simply call GCC_STACK_PROTECTOR. dnl If you only use one of C or C++, you can save time by only calling the dnl macro appropriate for that language. In that case you should also call dnl GCC_STACK_PROTECT_LIB first. dnl dnl GCC_STACK_PROTECTOR dnl Tries to turn on stack protection for C and C++ by calling the following dnl three macros with the right languages. dnl dnl GCC_STACK_PROTECT_CC dnl checks -fstack-protector with the C compiler, if it exists then updates dnl CFLAGS and defines ENABLE_SSP_CC dnl dnl GCC_STACK_PROTECT_CXX dnl checks -fstack-protector with the C++ compiler, if it exists then updates dnl CXXFLAGS and defines ENABLE_SSP_CXX dnl dnl GCC_STACK_PROTECT_LIB dnl adds -lssp to LIBS if it is available dnl ssp is usually provided as part of libc, but was previously a separate lib dnl It does not hurt to add -lssp even if libc provides SSP - in that case dnl libssp will simply be ignored. dnl AC_DEFUN([GCC_STACK_PROTECT_LIB],[ AC_CACHE_CHECK([whether libssp exists], ssp_cv_lib, [ssp_old_libs="$LIBS" LIBS="$LIBS -lssp" AC_TRY_LINK(,, ssp_cv_lib=yes, ssp_cv_lib=no) LIBS="$ssp_old_libs" ]) if test $ssp_cv_lib = yes; then LIBS="$LIBS -lssp" fi ]) AC_DEFUN([GCC_STACK_PROTECT_CC],[ AC_LANG_ASSERT(C) if test "X$CC" != "X"; then AC_CACHE_CHECK([whether ${CC} accepts -fstack-protector-all], ssp_cv_cc, [ssp_old_cflags="$CFLAGS" CFLAGS="$CFLAGS -fstack-protector-all" AC_TRY_COMPILE(,, ssp_cv_cc=yes, ssp_cv_cc=no) CFLAGS="$ssp_old_cflags" ]) if test $ssp_cv_cc = no; then AC_CACHE_CHECK([whether ${CC} accepts -fstack-protector], ssp_cv_cc, [ssp_old_cflags="$CFLAGS" CFLAGS="$CFLAGS -fstack-protector" AC_TRY_COMPILE(,, ssp_cv_cc=yes, ssp_cv_cc=no) CFLAGS="$ssp_old_cflags" ]) if test $ssp_cv_cc = yes; then CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=2 -fstack-protector" LDFLAGS="$LDFLAGS -fstack-protector" AC_DEFINE([ENABLE_SSP_CC], 1, [Define if SSP C support is enabled.]) fi else if test $ssp_cv_cc = yes; then CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=2 -fstack-protector-all" LDFLAGS="$LDFLAGS -fstack-protector-all" AC_DEFINE([ENABLE_SSP_CC], 1, [Define if SSP C support is enabled.]) fi fi fi ]) AC_DEFUN([GCC_STACK_PROTECT_CXX],[ AC_LANG_ASSERT(C++) if test "X$CXX" != "X"; then AC_CACHE_CHECK([whether ${CXX} accepts -fstack-protector], ssp_cv_cxx, [ssp_old_cxxflags="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -fstack-protector" AC_TRY_COMPILE(,, ssp_cv_cxx=yes, ssp_cv_cxx=no) CXXFLAGS="$ssp_old_cxxflags" ]) if test $ssp_cv_cxx = yes; then CXXFLAGS="$CXXFLAGS -fstack-protector" AC_DEFINE([ENABLE_SSP_CXX], 1, [Define if SSP C++ support is enabled.]) fi fi ]) AC_DEFUN([GCC_STACK_PROTECTOR],[ GCC_STACK_PROTECT_LIB AC_LANG_PUSH([C]) GCC_STACK_PROTECT_CC AC_LANG_POP([C]) AC_LANG_PUSH([C++]) GCC_STACK_PROTECT_CXX AC_LANG_POP([C++]) ]) AC_DEFUN([GCC_PIE_CC],[ AC_LANG_ASSERT(C) if test "X$CC" != "X"; then AC_CACHE_CHECK([whether ${CC} accepts -pie -fPIE], pie_cv_cc, [pie_old_cflags="$CFLAGS" CFLAGS="$CFLAGS -pie -fPIE" AC_TRY_COMPILE(,, pie_cv_cc=yes, pie_cv_cc=no) CFLAGS="$pie_old_cflags" ]) if test $pie_cv_cc = yes; then PIE_CFLAGS="-fPIE" PIE_LDFLAGS="-pie" fi fi ]) AC_DEFUN([SAMHAIN_POSIX],[ AC_MSG_CHECKING([whether _POSIX_SOURCE is necessary]) AC_TRY_COMPILE([#include void fileno(int);int fdopen(int, char *); ],, [ AC_MSG_RESULT(yes) AC_DEFINE([_POSIX_SOURCE],1,[Define if POSIX functions are required]) ], [AC_MSG_RESULT(no)]) ])dnl dnl checks for a known 64 bit programming environment dnl AC_RUN_IFELSE(PROGRAM, dnl [ACTION-IF-TRUE], [ACTION-IF-FALSE], dnl [ACTION-IF-CROSS-COMPILING = RUNTIME-ERROR]) dnl AC_DEFUN([SAMHAIN_PRG_ENV],[ AC_MSG_CHECKING([for a known 64 bit programming environment]) # Compile and run a program that determines the programming environment AC_RUN_IFELSE([ AC_LANG_SOURCE([[ #include int main(int argc,char **argv) { if (argc > 1) { #if defined(__arch64__) printf("__arch64__\n"); #elif defined(__ia64__) printf("__ia64__\n"); #elif defined(__x86_64__) printf("__x86_64__\n"); #elif defined(__LP64__) printf("__LP64__\n"); #elif defined(__64BIT__) printf("__64BIT__\n"); #elif defined(_LP64) printf("_LP64\n"); #elif defined(_M_IA64) printf("_M_IA64\n"); #elif defined(_MIPS_SZLONG) && (_MIPS_SZLONG == 64) printf("_MIPS_64\n"); #else choke me #endif } return 0; } ]]) ],[ # Program compiled and ran, so get version by adding argument. samhain_prg_ENV=`./conftest$ac_exeext x` samhain_64=yes AC_MSG_RESULT([$samhain_prg_ENV]) ],[ AC_MSG_RESULT([none]) ],[ AC_MSG_RESULT([none]) ]) ])dnl AC_DEFUN([SAMHAIN_X86_64],[ AC_MSG_CHECKING([for x86_64]) AC_TRY_RUN([ int main() { __asm__ volatile ( "movq %rax, %rax" ); return 0; } ], [ AC_MSG_RESULT(yes) samhain_64=yes tiger_src=sh_tiger1_64.c AC_DEFINE([TIGER_OPT_ASM],1,[Define to use tiger x86_64 optimized assembly]) ], [ AC_MSG_RESULT([no]) ],[ AC_MSG_RESULT([no]) ]) ])dnl AC_DEFUN([SAMHAIN_64],[ samhain_64=no tiger_src=sh_tiger1.c # # if sizeof(unsigned long) = 4, try compiler macros for 64bit # if test "x$ac_cv_sizeof_unsigned_long" = x4; then if test "x$ac_cv_sizeof_unsigned_long_long" = x8; then SAMHAIN_PRG_ENV if test "x$samhain_64" = xyes; then tiger_src=sh_tiger1_64.c fi # # if GCC and __i386__, use precompiled assembler # if test "x$GCC" = xyes; then AC_MSG_CHECKING([for non-apple non-cygwin i386]) samhain_i386=no $CC -E -dM - < /dev/null | egrep '__i386__' >/dev/null 2>&1 if test $? = 0; then # apples gcc does not understand the assembly we provide $CC -E -dM - < /dev/null | egrep '(__sun__|__APPLE__|__CYGWIN__)' >/dev/null 2>&1 || samhain_i386=yes fi if test "x$samhain_i386" = xyes; then tiger_src=sh_tiger1.s AC_DEFINE([TIGER_32_BIT_S],1,[Define to use tiger 32 bit i386 assembler]) fi AC_MSG_RESULT([$samhain_i386]) fi # # # else samhain_64=no tiger_src=sh_tiger1.c fi else # # sizeof(unsigned long) = 8 # tiger_src=sh_tiger1_64.c samhain_64=yes # # check for x86_64 (enables assembly optimizations) # if test "x$GCC" = xyes; then SAMHAIN_X86_64 fi fi if test "x$samhain_64" = xyes; then AC_DEFINE([TIGER_64_BIT],1,[Define to use tiger 64 bit implementation]) fi AC_MSG_CHECKING([for 64 bit environment]) AC_MSG_RESULT([$samhain_64]) AC_MSG_CHECKING([for tiger source to use]) AC_MSG_RESULT([$tiger_src]) AC_SUBST(tiger_src) ])dnl AC_DEFUN([sh_CHECK_POSIX_ACL], [ AC_CHECK_HEADERS(sys/acl.h) if test $ac_cv_header_sys_acl_h = yes; then AC_CHECK_LIB([acl], [acl_get_file], sh_lacl=yes, sh_lacl=no) if test x"$sh_lacl" = xyes; then LIBACL=-lacl else LIBACL= fi OLDLIBS="$LIBS" LIBS="$LIBS $LIBACL" AC_CHECK_FUNCS([acl_free acl_get_file acl_get_fd], [sh_facl=yes],[sh_facl=no]) LIBS="$OLDLIBS" if test x"$sh_facl" = xyes; then AC_DEFINE(USE_ACL, 1, [Define if you want ACL support.]) LIBS="$LIBS $LIBACL" fi fi ]) AC_DEFUN([sh_CHECK_XATTR], [ AC_CHECK_HEADERS(attr/xattr.h) if test $ac_cv_header_attr_xattr_h = yes; then AC_CHECK_LIB([attr], [getxattr], sh_lattr=yes, sh_lattr=no) if test x"$sh_lattr" = xyes; then LIBATTR=-lattr else LIBATTR= fi OLDLIBS="$LIBS" LIBS="$LIBS $LIBATTR" AC_CHECK_FUNCS([getxattr lgetxattr fgetxattr], [sh_fattr=yes],[sh_fattr=no]) LIBS="$OLDLIBS" if test x"$sh_fattr" = xyes; then AC_DEFINE(USE_XATTR, 1, [Define if you want extended attributes support.]) LIBS="$LIBS $LIBATTR" fi fi ]) dnl Autoconf macros for libprelude dnl $id$ # Modified for LIBPRELUDE -- Yoann Vandoorselaere # Modified for LIBGNUTLS -- nmav # Configure paths for LIBGCRYPT # Shamelessly stolen from the one of XDELTA by Owen Taylor # Werner Koch 99-12-09 dnl AM_PATH_LIBPRELUDE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]]) dnl Test for libprelude, and define LIBPRELUDE_PREFIX, LIBPRELUDE_CFLAGS, LIBPRELUDE_PTHREAD_CFLAGS, dnl LIBPRELUDE_LDFLAGS, and LIBPRELUDE_LIBS dnl AC_DEFUN([AM_PATH_LIBPRELUDE], [dnl dnl Get the cflags and libraries from the libprelude-config script dnl dnl AC_ARG_WITH(libprelude-prefix, dnl [ --with-libprelude-prefix=PFX Prefix where libprelude is installed (optional)], dnl libprelude_config_prefix="$withval", libprelude_config_prefix="") dnl dnl if test x$libprelude_config_prefix != x ; then dnl if test x${LIBPRELUDE_CONFIG+set} != xset ; then dnl LIBPRELUDE_CONFIG=$libprelude_config_prefix/bin/libprelude-config dnl fi dnl fi dnl dnl AC_PATH_PROG(LIBPRELUDE_CONFIG, libprelude-config, no) min_libprelude_version=ifelse([$1], ,0.1.0,$1) AC_MSG_CHECKING(for libprelude - version >= $min_libprelude_version) no_libprelude="" if test "$LIBPRELUDE_CONFIG" = "no" ; then no_libprelude=yes else LIBPRELUDE_CFLAGS=`$LIBPRELUDE_CONFIG $libprelude_config_args --cflags` LIBPRELUDE_PTHREAD_CFLAGS=`$LIBPRELUDE_CONFIG $libprelude_config_args --pthread-cflags` LIBPRELUDE_LDFLAGS=`$LIBPRELUDE_CONFIG $libprelude_config_args --ldflags` LIBPRELUDE_LIBS=`$LIBPRELUDE_CONFIG $libprelude_config_args --libs` LIBPRELUDE_PREFIX=`$LIBPRELUDE_CONFIG $libprelude_config_args --prefix` LIBPRELUDE_CONFIG_PREFIX=`$LIBPRELUDE_CONFIG $libprelude_config_args --config-prefix` libprelude_config_version=`$LIBPRELUDE_CONFIG $libprelude_config_args --version` ac_save_CFLAGS="$CFLAGS" ac_save_LDFLAGS="$LDFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $LIBPRELUDE_CFLAGS" LDFLAGS="$LDFLAGS $LIBPRELUDE_LDFLAGS" LIBS="$LIBS $LIBPRELUDE_LIBS" dnl dnl Now check if the installed libprelude is sufficiently new. Also sanity dnl checks the results of libprelude-config to some extent dnl rm -f conf.libpreludetest AC_TRY_RUN([ #include #include #include #include int main () { system ("touch conf.libpreludetest"); if( strcmp( prelude_check_version(NULL), "$libprelude_config_version" ) ) { printf("\n*** 'libprelude-config --version' returned %s, but LIBPRELUDE (%s)\n", "$libprelude_config_version", prelude_check_version(NULL) ); printf("*** was found! If libprelude-config was correct, then it is best\n"); printf("*** to remove the old version of LIBPRELUDE. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If libprelude-config was wrong, set the environment variable LIBPRELUDE_CONFIG\n"); printf("*** to point to the correct copy of libprelude-config, and remove the file config.cache\n"); printf("*** before re-running configure\n"); } else if ( strcmp(prelude_check_version(NULL), LIBPRELUDE_VERSION ) ) { printf("\n*** LIBPRELUDE header file (version %s) does not match\n", LIBPRELUDE_VERSION); printf("*** library (version %s)\n", prelude_check_version(NULL) ); } else { if ( prelude_check_version( "$min_libprelude_version" ) ) { return 0; } else { printf("no\n*** An old version of LIBPRELUDE (%s) was found.\n", prelude_check_version(NULL) ); printf("*** You need a version of LIBPRELUDE newer than %s. The latest version of\n", "$min_libprelude_version" ); printf("*** LIBPRELUDE is always available from http://www.prelude-ids.org/download/releases.\n"); printf("*** \n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the libprelude-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of LIBPRELUDE, but you can also set the LIBPRELUDE_CONFIG environment to point to the\n"); printf("*** correct copy of libprelude-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_libprelude=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" LDFLAGS="$ac_save_LDFLAGS" fi if test "x$no_libprelude" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else if test -f conf.libpreludetest ; then : else AC_MSG_RESULT(no) fi if test "$LIBPRELUDE_CONFIG" = "no" ; then echo "*** The libprelude-config script installed by LIBPRELUDE could not be found" echo "*** If LIBPRELUDE was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the LIBPRELUDE_CONFIG environment variable to the" echo "*** full path to libprelude-config." else if test -f conf.libpreludetest ; then : else echo "*** Could not run libprelude test program, checking why..." CFLAGS="$CFLAGS $LIBPRELUDE_CFLAGS" LDFLAGS="$LDFLAGS $LIBPRELUDE_LDFLAGS" LIBS="$LIBS $LIBPRELUDE_LIBS" AC_TRY_LINK([ #include #include #include #include ], [ return !!prelude_check_version(NULL); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding LIBPRELUDE or finding the wrong" echo "*** version of LIBPRELUDE. If it is not finding LIBPRELUDE, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" echo "***" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means LIBPRELUDE was incorrectly installed" echo "*** or that you have moved LIBPRELUDE since it was installed. In the latter case, you" echo "*** may want to edit the libprelude-config script: $LIBPRELUDE_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LDFLAGS="$ac_save_LDFLAGS" LIBS="$ac_save_LIBS" fi fi LIBPRELUDE_CFLAGS="" LIBPRELUDE_LDFLAGS="" LIBPRELUDE_LIBS="" ifelse([$3], , :, [$3]) fi rm -f conf.libpreludetest AC_SUBST(LIBPRELUDE_CFLAGS) AC_SUBST(LIBPRELUDE_PTHREAD_CFLAGS) AC_SUBST(LIBPRELUDE_LDFLAGS) AC_SUBST(LIBPRELUDE_LIBS) AC_SUBST(LIBPRELUDE_PREFIX) AC_SUBST(LIBPRELUDE_CONFIG_PREFIX) ]) ##### http://autoconf-archive.cryp.to/acx_pthread.html # # SYNOPSIS # # ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]]) # # DESCRIPTION # # This macro figures out how to build C programs using POSIX threads. # It sets the PTHREAD_LIBS output variable to the threads library and # linker flags, and the PTHREAD_CFLAGS output variable to any special # C compiler flags that are needed. (The user can also force certain # compiler flags/libs to be tested by setting these environment # variables.) # # Also sets PTHREAD_CC to any special C compiler that is needed for # multi-threaded programs (defaults to the value of CC otherwise). # (This is necessary on AIX to use the special cc_r compiler alias.) # # NOTE: You are assumed to not only compile your program with these # flags, but also link it with them as well. e.g. you should link # with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS # $LIBS # # If you are only building threads programs, you may wish to use # these variables in your default LIBS, CFLAGS, and CC: # # LIBS="$PTHREAD_LIBS $LIBS" # CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # CC="$PTHREAD_CC" # # In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute # constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to # that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX). # # ACTION-IF-FOUND is a list of shell commands to run if a threads # library is found, and ACTION-IF-NOT-FOUND is a list of commands to # run it if it is not found. If ACTION-IF-FOUND is not specified, the # default action will define HAVE_PTHREAD. # # Please let the authors know if this macro fails on any platform, or # if you have any other suggestions or comments. This macro was based # on work by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) # (with help from M. Frigo), as well as ac_pthread and hb_pthread # macros posted by Alejandro Forero Cuervo to the autoconf macro # repository. We are also grateful for the helpful feedback of # numerous users. # # LAST MODIFICATION # # 2007-07-29 # # COPYLEFT # # Copyright (c) 2007 Steven G. Johnson # # This program is free software: you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation, either version 3 of the # License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see # . # # As a special exception, the respective Autoconf Macro's copyright # owner gives unlimited permission to copy, distribute and modify the # configure scripts that are the output of Autoconf when processing # the Macro. You need not follow the terms of the GNU General Public # License when using or distributing such scripts, even though # portions of the text of the Macro appear in them. The GNU General # Public License (GPL) does govern all other use of the material that # constitutes the Autoconf Macro. # # This special exception to the GPL applies to versions of the # Autoconf Macro released by the Autoconf Macro Archive. When you # make and distribute a modified version of the Autoconf Macro, you # may extend this special exception to the GPL to apply to your # modified version as well. AC_DEFUN([ACX_PTHREAD], [ AC_REQUIRE([AC_CANONICAL_HOST]) AC_LANG_SAVE AC_LANG_C acx_pthread_ok=no # We used to check for pthread.h first, but this fails if pthread.h # requires special compiler flags (e.g. on True64 or Sequent). # It gets checked for in the link test anyway. # First of all, check if the user has set any of the PTHREAD_LIBS, # etcetera environment variables, and if threads linking works using # them: if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS]) AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes) AC_MSG_RESULT($acx_pthread_ok) if test x"$acx_pthread_ok" = xno; then PTHREAD_LIBS="" PTHREAD_CFLAGS="" fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" fi # We must check for the threads library under a number of different # names; the ordering is very important because some systems # (e.g. DEC) have both -lpthread and -lpthreads, where one of the # libraries is broken (non-POSIX). # Create a list of thread flags to try. Items starting with a "-" are # C compiler flags, and other items are library names, except for "none" # which indicates that we try without any flags at all, and "pthread-config" # which is a program returning the flags for the Pth emulation library. acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" # The ordering *is* (sometimes) important. Some notes on the # individual items follow: # pthreads: AIX (must check this before -lpthread) # none: in case threads are in libc; should be tried before -Kthread and # other compiler flags to prevent continual compiler warnings # -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) # -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads) # -pthreads: Solaris/gcc # -mthreads: Mingw32/gcc, Lynx/gcc # -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it # doesn't hurt to check since this sometimes defines pthreads too; # also defines -D_REENTRANT) # ... -mt is also the pthreads flag for HP/aCC # pthread: Linux, etcetera # --thread-safe: KAI C++ # pthread-config: use pthread-config program (for GNU Pth library) case "${host_cpu}-${host_os}" in *solaris*) # On Solaris (at least, for some versions), libc contains stubbed # (non-functional) versions of the pthreads routines, so link-based # tests will erroneously succeed. (We need to link with -pthreads/-mt/ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather # a function called by this macro, so we could check for that, but # who knows whether they'll stub that too in a future libc.) So, # we'll just look for -pthreads and -lpthread first: acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags" ;; esac if test x"$acx_pthread_ok" = xno; then for flag in $acx_pthread_flags; do case $flag in none) AC_MSG_CHECKING([whether pthreads work without any flags]) ;; -pthread) AC_MSG_CHECKING([whether pthreads work with $flag]) PTHREAD_CFLAGS="$flag" ;; -*) AC_MSG_CHECKING([whether pthreads work with $flag]) PTHREAD_CFLAGS="$flag" ;; pthread-config) AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no) if test x"$acx_pthread_config" = xno; then continue; fi PTHREAD_CFLAGS="`pthread-config --cflags`" PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" ;; *) AC_MSG_CHECKING([for the pthreads library -l$flag]) PTHREAD_LIBS="-l$flag" ;; esac save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" save_LDFLAGS="$LDFLAGS" LIBS="$PTHREAD_LIBS $LIBS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" LDFLAGS="$LDFLAGS $PTHREAD_CFLAGS" # Check for various functions. We must include pthread.h, # since some functions may be macros. (On the Sequent, we # need a special flag -Kthread to make this header compile.) # We check for pthread_join because it is in -lpthread on IRIX # while pthread_create is in libc. We check for pthread_attr_init # due to DEC craziness with -lpthreads. We check for # pthread_cleanup_push because it is one of the few pthread # functions on Solaris that doesn't have a non-functional libc stub. # We try pthread_create on general principles. AC_TRY_LINK([#include ], [pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ], [acx_pthread_ok=yes]) LIBS="$save_LIBS" LDFLAGS="$save_LDFLAGS" CFLAGS="$save_CFLAGS" AC_MSG_RESULT($acx_pthread_ok) if test "x$acx_pthread_ok" = xyes; then break; fi PTHREAD_LIBS="" PTHREAD_CFLAGS="" done fi # Various other checks: if test "x$acx_pthread_ok" = xyes; then save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. AC_MSG_CHECKING([for joinable pthread attribute]) attr_name=unknown for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do AC_TRY_LINK([#include ], [int attr=$attr; return attr;], [attr_name=$attr; break]) done AC_MSG_RESULT($attr_name) if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name, [Define to necessary symbol if this constant uses a non-standard name on your system.]) fi # Solaris lossage: default is obsolete semantics for getpwnam_r, # getpwuid_r, getgrgid_r, unless _POSIX_PTHREAD_SEMANTICS is defined AC_MSG_CHECKING([if more special flags are required for pthreads]) flag=no case "${host_cpu}-${host_os}" in *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";; *-osf* | *-hpux*) flag="-D_REENTRANT";; *solaris*) flag="-D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT";; esac AC_MSG_RESULT(${flag}) if test "x$flag" != xno; then PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS" fi # Detect PTHREAD_MUTEX_RECURSIVE AC_MSG_CHECKING([for recursive mutexes]) mutex_recursive=no AC_TRY_LINK([ #define _XOPEN_SOURCE 500 #include ], [ pthread_mutexattr_t mta; pthread_mutexattr_settype(&mta, PTHREAD_MUTEX_RECURSIVE); return 0;],[mutex_recursive=yes]) if test "x$mutex_recursive" = "xyes" then AC_DEFINE(HAVE_PTHREAD_MUTEX_RECURSIVE,1,[Define if you have recursive mutexes.]) fi AC_MSG_RESULT($mutex_recursive) LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" # More AIX lossage: must compile with xlc_r or cc_r if test x"$GCC" != xyes; then AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC}) else PTHREAD_CC=$CC fi else PTHREAD_CC="$CC" fi if test x"$acx_pthread_ok" = xyes; then PTHREAD_CFLAGS="${PTHREAD_CFLAGS} -DUSE_MALLOC_LOCK=1" fi AC_SUBST(PTHREAD_LIBS) AC_SUBST(PTHREAD_CFLAGS) AC_SUBST(PTHREAD_LDFLAGS) AC_SUBST(PTHREAD_CC) # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: if test x"$acx_pthread_ok" = xyes; then ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1]) : else acx_pthread_ok=no $2 fi AC_LANG_RESTORE ])dnl ACX_PTHREAD dnl Copyright © 2004 Loic Dachary dnl dnl This program is free software; you can redistribute it and/or modify dnl it under the terms of the GNU General Public License as published by dnl the Free Software Foundation; either version 2 of the License, or (at dnl your option) any later version. dnl dnl Use ZLIB_HOME instead of option AC_DEFUN([CHECK_ZLIB],[ if test "x${ZLIB_HOME}" = "x"; then ZLIB_HOME=/usr/local if test ! -f "${ZLIB_HOME}/include/zlib.h" then ZLIB_HOME=/usr fi fi zlib_found=no ZLIB_OLD_LDFLAGS=$LDFLAGS ZLIB_OLD_CPPFLAGS=$LDFLAGS if test "x${ZLIB_HOME}" = "x/usr"; then : else LDFLAGS="$LDFLAGS -L${ZLIB_HOME}/lib" CPPFLAGS="$CPPFLAGS -I${ZLIB_HOME}/include" fi AC_LANG_SAVE AC_LANG_C AC_CHECK_LIB(z, inflateEnd, [zlib_cv_libz=yes], [zlib_cv_libz=no]) AC_CHECK_HEADER(zlib.h, [zlib_cv_zlib_h=yes], [zlib_cv_zlib_h=no]) AC_LANG_RESTORE if test "$zlib_cv_libz" = "yes" -a "$zlib_cv_zlib_h" = "yes" then # # If both library and header were found, use them # AC_CHECK_LIB(z, inflateEnd) AC_MSG_CHECKING([zlib in ${ZLIB_HOME}]) AC_MSG_RESULT(ok) AC_CHECK_FUNCS([compressBound]) zlib_found=yes else # # If either header or library was not found, revert and bomb # AC_MSG_CHECKING(zlib in ${ZLIB_HOME}) LDFLAGS="$ZLIB_OLD_LDFLAGS" CPPFLAGS="$ZLIB_OLD_CPPFLAGS" AC_MSG_RESULT(failed) AC_MSG_WARN([zlib not found in ZLIB_HOME, /usr/local, or /usr]) fi ]) # SH_PROG_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([SH_PROG_LD], [ AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac else AC_MSG_CHECKING([for ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1